¦Securing the TV to the Wall
Caution: Pulling, pushing, or climbing on the TV may cause the TV to fall. In particular, ensure your children do not hang over or destabilize the TV; doing so may cause the TV to tip over, causing serious injuries or death. Follow all safety precautions provided on the included Safety Flyer. For added stability, install the
To secure the TV:
1.Put the screws into the clamps and firmly fasten them onto the wall. Confirm that the screws have been firmly installed onto the wall.
NYou may need additional material such as an anchor depending on the type of wall.
N Since the necessary clamps, screws, and string are not supplied, please |
|
purchase them separately. | Wall |
|
2.Remove the screws from the centre back of the TV, put the screws into the clamps,
and then fasten the screws onto the TV again.
N Screws may not be supplied with the product. In this case, please purchase the screws of the following specifications.
N Screw Specifications
For a 32 ~ 55 Inch LED TV: M8 X L10
3.Connect the clamps fixed onto the TV and the clamps fixed onto the wall with a strong cable.
N Install the TV near to the wall so that it does not fall backwards.
N It is safe to connect the string so that the clamps fixed on the wall are equal to or |
|
|
|
| |
lower than the clamps fixed on the TV. |
|
|
| Wall | |
N Remove the cable before moving the TV. |
|
|
| ||
|
|
|
| ||
4. Verify all connections are properly secured. Periodically check connections for any |
|
|
|
| |
|
|
|
| ||
|
|
|
| ||
sign of fatigue for failure. If you have any doubt about the security of your connections, |
|
|
|
|
|
contact a professional installer. |
|
|
|
| |