¦Listening through a Receiver (Home theatre)
You can listen to sound through a receiver instead of the TV speaker.
1.Press the TOOLS button. Press the ENTEREbutton to select Anynet+
2.Press the ▲ or ▼ button to select Receiver. Press the ◄ or ► button to select On or Off.
3.Press the EXIT button to exit.
N If your receiver supports audio only, it may not appear in the device list.
N The receiver will work when you have properly connected the optical in jack of the receiver to the DIGITAL AUDIO OUT (OPTICAL) jack of the TV.
N When the receiver (home theatre) is set to On, you can hear sound output from the TV’s Optical jack. When the TV is displaying a DTV(air) signal, the TV will send out 5.1 channel sound to the Home theatre receiver. When the source is a digital component such as a DVD and is connected to the TV via HDMI, only 2 channel sound will Theatre receiver.
View TV
Device List
Recording: DVDR
DVDR MENU
DVDR INFO
Receiver: Off
Setup
UMove EEnter RReturn
be heard from the Home
NIf there is a power interruption to the TV when the Receiver is set to On (by disconnecting the power cord or a power failure), the Speaker Select may be set to External Speaker when you turn the TV on again.
¦Troubleshooting for Anynet+
Problem | Possible Solution |
Anynet+ does not work. | ● Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ |
| devices only. |
| ● Connect only one receiver (home theatre). |
| ● Check if the Anynet+ device power cord is properly connected. |
| ● Check the Anynet+ device’s Video/Audio/HDMI 1.3 cable connections. |
| ● Check whether Anynet+ |
| ● Check whether the TV remote control is in TV mode. |
| ● Check whether it is Anynet+ exclusive remote control. |
| ● Anynet+ doesn’t work in certain situations. (Searching channels, Operating Media Play, |
| Plug & Play, etc.) |
| ● When connecting or removing the HDMI 1.3 cable, please make sure to search devices |
| again or turn your TV off and on again. |
| ● Check if the Anynet+ Function of Anynet+ device is set on. |
I want to start Anynet+. | ● Check if the Anynet+ device is properly connected to the TV and check if the Anynet+ |
|
|
| ● Press the TV button on the TV remote control to switch to TV. Then press the TOOLS |
| button to show the Anynet+ menu and select a menu you want. |
I want to exit Anynet+. | ● Select View TV in the Anynet+ menu. |
| ● Press the SOURCE button on the TV remote control and select a device other than |
| Anynet+ devices. |
| ● Press P >/<, CH LIST, |
| the channel button operates only when a |
| connected.) |
The message | ● You cannot use the remote control when you are configuring Anynet+ or switching to a |
‘Connecting to Anynet+ | view mode. |
device...’ appears on the | ● Use the remote control when the Anynet+ setting or switching to view mode is |
screen. | complete. |
The Anynet+ device does | ● You cannot use the play function when Plug & Play is in progress. |
not play. |
|
The connected device is | ● Check whether or not the device supports Anynet+ functions. |
not displayed. | ● Check whether or not the HDMI 1.3 cable is properly connected. |
| ● Check whether Anynet+ |
| ● Search Anynet+ devices again. |
| ● You can connect an Anynet+ device using the HDMI 1.3 cable only. Some HDMI cables |
| may not support Anynet+ functions. |
| ● If it is terminated by an abnormal situation such as disconnecting the HDMI cable or |
| power cord or a power failure, please repeat the device scan. |
The TV programme | ● Check whether the antenna jack on the recording device is properly connected. |
cannot be recorded. |
|
The TV sound is not | ● Connect the optical cable between TV and the receiver. |
output through the |
|
receiver. |
|