Part name of the Virtual guard
Power button
| POWERbot detection sensor |
Power lamp |
|
Power on: Red lamp blinks |
|
Power off: Lamp is off | Distance detection sensor |
| (Infrared ray sensor) |
Battery cover
Inserting batteries
Batteries for Virtual guard must be purchased separately.
1 Open the battery cover of the Virtual guard by pressing the locking tab and lift it up.
2 Insert the alkaline batteries (D type) as shown in the illustration (check the +, - polarity).
3 Insert the tip of the cover into the slot and push the other end to close the battery cover.
✻✻Specification: type D (LR20) batteries