Cleaning and maintaining
You must turn off the emergency switch before cleaning POWERbot.
Cleaning the dustbin
Clean the dustbin when filter inspection indicator ( 
) turns on or if there's too much dust in the dustbin.
1 Remove the dustbin
2 Removecover the dustbin
3 Remove dust in the dustbin and cyclone unit
"Click"
4 Detach the cyclone unit from the dustbin cover then wash the dustbin and the filter
5 Reassembledustbin the
6 Reinsert the dustbin into the main body until it clicks
Cleaning the sensors and the camera
Lightly wipe with soft cloth. Do not use water or cleaning solutions.
Camera 
Front sensor | Cliff sensors | Rear sensor | |
window | window | ||
|