Samsung VR20K9350WK/SA manual Charging, Use, Cleaning and maintenance, ENGLISH-30

Page 30

Notes and cautions

Charging

Note

ffIf the battery overheats during charging, it may take longer to charge.

ffWhen automatic charging is not working, please check the followings.

–– Turn the emergency switch (on the bottom of POWERbot) off and on again.

–– Unplug the docking station's power plug and then plug it back on.

–– Check whether there is any foreign matter in the charge pins and clean POWERbot and the charge pins of the docking station with a dry cloth or rag.

–– Check for any obstacles such as reflective objects, chairs, etc. near the docking station.

ffIf POWERbot is left detached from the docking station, the battery will drain naturally.

–– Try to keep POWERbot being charged on the docking station. (Turn off the emergency switch and leave the docking station unplugged when planning to leave the house for long periods of time by going on a business trip or vacation, etc., )

In use

ffThe POWERbot cannot vacuum clumps of dirt, so some may remain on the floor after cleaning.

–– Please use another cleaning tool to clean them regularly.

ffIf the battery becomes low during Auto clean mode, POWERbot will recharge and finish cleaning the remaining area after recharging. (Repeat cleaning frequency: 1 time)

ffYou cannot select and execute Spot clean mode while charging.

ffIf you press Manual clean / Point cleaning button while charging, the POWERbot will be detached from the docking station and then turn into the standby mode.

ffDo not lie down around the POWERBOT that is running.

–– Your hair may be caught in the Pet brush, resulting in physical injury

Cleaning and maintenance

Note

ffIf you washed the dustbin and filter with water

–– Dustbin: Completely wipe out the water.

–– Filter: Completely dry it in a shade before use.

Note

ffThe POWERbot may get caught on thresholds, etc. during cleaning.

–– To restart operation, shut off the emergency switch, move POWERbot to an area where it can move easily and then turn on the power again.

ffThe POWERbot cannot completely clean areas it cannot enter, such as corners, between the wall and sofa, etc.

–– Please use another cleaning tool to clean them regularly.

Caution

ffWatch your finger when attaching or detaching the filter, since they may get stuck in the dustbin's intake.

ffTo avoid blockages by foreign matter, do not let toothpicks, cotton swabs etc. from being vacuumed by POWERbot.

ffIf it is difficult to remove foreign matters from the Pet brush, contact a service center.

ENGLISH-30

Image 30
Contents POWERbot Using the remote control ENGLISH-02Indicates that a detachable supply unit Safety informationInformation ENGLISH-03General ENGLISH-04ENGLISH-05 ENGLISH-06 FfPlease prevent any risk of electric shock or fireENGLISH-07 Installation Power of the docking station must be on at all timesENGLISH-08 Accessories ENGLISH-09Charging ENGLISH-10Steps to take if recharging is not being executed Check the installation status of the docking station whenManually charge POWERbot when ENGLISH-11Installing the Virtual guard ENGLISH-12Part name of the Virtual guard ENGLISH-13Press Button for more than Second Using POWERbotYou must turn on the emergency switch before using POWERbot Location recognizing functionManual clean Cleaning method for each modesAuto clean Spot clean ENGLISH-15Using the remote control Inserting batteriesENGLISH-16 Manual clean mode & Direction control ENGLISH-17Bottom Name of each partTop Display panelSetting the schedule Setting time/scheduleSetting the time Cancelling during setupCleaning the sensors and the camera Cleaning and maintainingCleaning the dustbin ENGLISH-20Remove the Pet brush Clean the Pet brush Cover Cleaning the Pet brushCleaning the Driving wheel Reassemble the Pet Brush Brush coverPreparing the network Setting up the wireless routerSamsung Smart Home App ENGLISH-22Downloading Samsung Smart Home app Using the Samsung Smart Home appCreating your Samsung account ENGLISH-23Registering the product Easy-Setup AndroidENGLISH-24 IOS ENGLISH-25ENGLISH-26 Main screen User menu screenENGLISH-27 Controlling POWERbot ENGLISH-28Using Select & Go ENGLISH-29Use Cleaning and maintenanceCharging ENGLISH-30About battery About the IrDA sensorENGLISH-31 Information codes ENGLISH-32Troubleshooting ENGLISH-33Dust sensor mode is on by default. When the POWERbot ENGLISH-34Specifications Open Source AnnouncementENGLISH-35 This product is RoHS compliant