Samsung VR20K9350WK/SA manual Using POWERbot, Press Button for more than Second, ENGLISH-14

Using POWERbot

You must turn on the emergency switch before using POWERbot.

Turning the power on/off

Press the	button for more than	WARNING
3 second

•When POWERbot is not used for

30 minutes, it will return to the docking station to charge itself automatically.

Using Auto clean mode

The POWERbot moves and cleans automatically until it cleans entire space once.

✻✻Stop cleaning: Press the button

Using Spot clean mode

The POWERbot cleans a localized area intensely.

Recharging

You may command POWERbot to recharge at the docking station automatically while it is in cleaning process.

Location recognizing function

fIf turning off the POWERbot and turning it back on, the POWERbot will search the location that it stopped previously and then clean the area where was not cleaned before.

–– When the location recognizing function operates, the POWERbot searches the current location.

–– If the searching is failed more than 3 times, the POWERbot will start to clean from the beginning.

Note

ffStart the cleaning again at the area within 1 m around where the POWERbot stopped.

–– If you start the cleaning at the area more than 1 m from where the POWERbot stopped,

it is difficult to search the location and the POWERbot may clean the area where it already cleaned.

ENGLISH-14