Using Select & Go
A feature that allows the user to select and clean specific areas using the Samsung Smart Home app. 1. Cleaning Map and Cleaning Floorplan
ffCleaning Map represents the areas the POWERbot moved while cleaning.
ffCleaning Floorplan is an artificially delineated representation of Cleaning Map.
2. Area Cleaning
ffIncludes configurable labels for each of the areas. ffSelect areas to clean and tap Start to clean. ffEach area’s status is indicated on the map.
Completed | | | | Canceled, Error occurred |
| |
Selected
Progressing
Note
ffPrecautions for Setting Cleaning Floorplan
–– Place the charging station flush to a wall in an open area.
–– Remove obstacles from the floor (rugs, towels, chairs, mats, toys, etc.).
–– Remove obstacles along the paths to the areas to be included in the floorplan.
–– If possible, close all doors with high sills (veranda, balcony, etc.).
–– Ensure the areas to be included in the floorplan are well illuminated.
ffCautions for Using Area Cleaning
–– Area Cleaning can commence only when Powerbot is being charged.
–– Area Cleaning will not function properly if the actual station’s location and orientation do not match the location and orientation in the floorplan selected.
–– Area Cleaning feature may not function properly depending on the state of the floor and/or placement or obstacles in the concerned area.
–– Areas on a floorplan are areas artificially delineated by Powerbot and may not include all the rooms.
–– Map generation and Select & Go may not be available on areas covered in some carpets.
–– There may be the difference between floorplans according to status of Powerbot even the environment is same.
–– The user can select and use the desired floorplan by Floor plan menu.
ENGLISH-29