Other Issues
The Problem
Try this!
| Watching TV for an extended period of time causes the panel to generate heat. | |
| The heat from the panel is dissipated through internal vents running along the | |
The TV is hot. | top of the TV. The bottom, however, may feel hot to the touch after extended | |
use. Children watching TV need constant adult supervision to prevent them from | ||
| ||
| touching the TV. This heat, however, is not a defect and does not affect the TV's | |
| functionality. | |
|
| |
| HD channels will have black bars on either side of the screen when displaying | |
| upscaled SD (4:3) content. | |
The picture won’t | Black bars will appear at the top and bottom of the screen when you watch | |
display in full screen. | movies that have aspect ratios different from your TV. | |
| Adjust the picture size options on your external device or set the TV to full | |
| screen. | |
|
| |
The "Mode Not | The output resolution of the attached device is not supported by the TV. Check | |
Supported" message | the supported resolutions of the TV and adjust the external device’s output | |
appears. | resolution accordingly. | |
|
| |
The Subtitle item in the | You cannot select the Subtitle menu if you have selected a source connected | |
to the TV via HDMI or Component connections. To view subtitle, turn on the | ||
TV menu is grayed out. | ||
external device's subtitle function. | ||
| ||
|
| |
The TV smells of plastic. | This smell is normal and will dissipate over time. | |
|
| |
The TV is tilted to the | Remove the base stand from the TV and reassemble it. | |
side. | ||
| ||
|
| |
The Broadcasting option | Broadcasting is only available when the Source is set to TV. | |
The Broadcasting menu cannot be accessed while watching TV using a cable | ||
has been deactivated. | ||
box or satellite receiver. | ||
| ||
|
| |
The settings are lost | If the Use Mode is set to Store Demo, the TV's audio and video settings are | |
after 5 minutes or every | automatically reset every 5 minutes. | |
time the TV is turned off. | Change the Use Mode (Support > Use Mode) to Home Use. | |
|
| |
| Check the cable connections and reconnect them. | |
There is an intermittent | Loss of audio or video can be caused by using overly rigid or thick cables. | |
loss of audio or video. | Make sure the cables are flexible enough for long term use. If you are mounting | |
| the TV to a wall, we recommend using cables with | |
|
| |
There are small particles | This is part of the product’s design and is not a defect. | |
on the TV's bezel. | ||
| ||
|
| |
The PIP menu is not | PIP functionality is only available when you are using an HDMI or Component | |
available. | source. | |
|
| |
A POP (TV’s internal |
| |
banner ad) appears on | Change the Use Mode (Support > Use Mode) to Home Use. | |
the screen. |
| |
|
|