troubleshooting
CHECK THESE SOLUTIONS IF YOUR WASHER…
PROBLEM | SOLUTION | |
|
| |
Will not start. | • Make sure the door is closed. | |
| • Make sure your Washer is plugged in. | |
| • Make sure the water source faucets are open. | |
| • Make sure to press the Start/Pause Button to start your Washer. | |
| • Make sure Child Lock is not activated. See page 20. | |
| • Before your Washer starts to fill, it will make a series of clicking noises | |
| to check the door lock and do a quick drain. | |
| • Check the fuse or reset the circuit breaker | |
|
| |
Has no water or not enough | • Turn both faucets on fully. | |
water.. | • Straighten the water inlet hoses. | |
| ||
| • Disconnect hoses and clean the screens. Hose filter screens may be | |
| clogged. | |
| • Open and close the door, then press the Start/Pause Button. | |
|
| |
Has detergent remaining |
| |
in the automatic dispenser | • Make sure your Washer is running with sufficient water pressure. | |
after the wash cycle is | ||
| ||
complete. |
| |
|
| |
Vibrates or is too noisy. | • Make sure your Washer is set on a level surface. If the surface is not | |
| level, adjust your Washer feet to level the appliance. | |
| • Make sure that the shipping bolts are removed. | |
| • Make sure your Washer is not touching any other object. | |
| • Make sure the laundry load is balanced. | |
|
| |
Stops | • Plug the power cord into a live electrical outlet. | |
| • Check the fuse or reset the circuit breaker. | |
| • Close the door and press the Start/Pause Button to start your | |
| Washer. | |
| For your safety, your Washer will not spin unless the door is closed. | |
| • Before your Washer starts to fill, it will make a series of clicking noises | |
| to check the door lock and do a quick drain. | |
| • There may be a pause or soak period in the cycle. Wait and it may | |
| start. | |
| • Check the screens on the inlet hoses at the faucets for obstructions. | |
| Clean the screens periodically. | |
|
|