operating instructions
WARNING: To reduce the risk of fire, electric shock, or injury to persons when using your appliance, WARNING follow basic precautions, including the following:
Loading your washer
•Fill the tub with dry, unfolded clothes evenly around in order to enhance washing efficiency and prevent excess wear, or wrinkling of the load.
-For optimal washing performance, make sure the laundry is piled up evenly.
•Wash delicate items such as bras, hosiery, and other lingerie in the Delicates/Hand Wash cycle with similar lightweight items.
•When washing big bulky items or a few smaller items that don’t fill the tub completely – a rug, a pillow, stuffed toys, or one or two sweaters, for example – add a few towels to improve spin performance.
•Do not insert bulky items except for Bedding in this cycle.
During the spin cycle, the washer may add additional water to redistribute the clothes and correct an imbalance inside the drum.
•When washing heavily soiled loads, do not overload your washer to ensure good cleaning results.
•To add a forgotten item:
1.Press the Start/Pause button to pause the washer.
2.Wait for the door to unlock automatically, and then open the door.
3.Add the item, close the door, and then press the Start/Pause button. The cycle will resume.
Getting started
1.Load your washer.
2.Add liquid (or powder) detergent and additives to the dispenser (see pages 25~27).
3.Select the appropriate cycle and options for the load (see pages 19~24).
4.Close the lid.
5.Press the Start/Pause button.
6.The Wash Indicator light illuminates.
7.The estimated cycle time will appear in the display.
The time may fluctuate to indicate the time remaining in the cycle better.
The actual time required for a cycle may differ from the estimated time in the display depending on the water pressure, water temperature, detergent, and laundry.
8. Before your washer starts to fill, it will make a series of clicking noises to check the door lock and do a quick drain.
•When the cycle is complete, the Door Lock light will go out and “End” will appear in the display.
•Pressing the Power button cancels the cycle and stops your washer.
•The Wash, Rinse ,and Spin indicator lights will illuminate during those portions of the cycle.
English - 18
2015/7/28 10:38:51