Samsung AR24HCSDBWKXMG Mode, When the air conditioner is on and in cool/heat mode, English-20

Page 20

mode

For a comfortable sleep, the air conditioner will operate it Fall asleep Sound sleep Wake up frommode.

When the air conditioner is on and in cool/heat mode

1.

Press the

button on the remote controller.

 

indicator appears and Off timer indicator starts blinking on the remote

 

controller display.

2.

Press the

button to set the time.

You can set the time in half hourly unit from 30 minutes ~ 3 hours and hour unit from

3 hours ~ 12 hours.

Operating hour can be set from minimum 30 minutes to maximum 12 hours. Default operation hour is set to 8 hours.

3. Press the Set/Cancel button to activate it.

Off timer indicator stops blinking and reserved time will be displayed for 3 seconds.

Then the air conditioner operates in good’sleep mode.

If you don’t press Set/Cancel button within 10 seconds after pressing the button, the air conditioner will return to previous status. Check Off

timer indicator on the remote controller display and indicator on the indoor unit.

Cancel Press the Set/Cancel button once again.

You can set the desired temperature by 1 ˚C in the range of 16 ˚C~30 ˚C.

Fan speed will be adjusted automatically according to the mode.

However, If you selectmode while heating operation is on, you can adjust fan speed.

When the mode is on.

In Cool mode: Air flow direction will be adjusted automatically.

In Heat mode: Adjusting air flow direction is available.

Temperature and fan speed change inmode

•Fall asleep: Eases you into sleep by dropping the temperature.

•Sound sleep: Relaxes your body and raises your temperature slightly.

•Wake up frommode: Allows you to wake up from comfortable intermittent air and it makes you feel refreshed.

• Set Off timer in

mode over 5 hours. You fell disturbed sleep if the

is set too short or long

because the default is set to 8-hour-operation.

 

•If themode is set less than 4 hours, the operation will stop at the same time.

If themode is set over 5 hours, it will run as Wake up stage from the last one hour before it stops.

•Recommended set temperature is between 25 ˚C~27 ˚C for cooling and 21 ˚C~23 ˚C for heating.

English-20

MG_BETTER_A3050_IB&IM_EN_DB68-04070A-00.indd 20

17/09/2013 11:23:19

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Air Conditioner Features of your new air conditioner Contents Safety precautions English-4English-5 01epaPr n atioFor Using English-6English-7 Do not place objects or devices under the indoor unit English-8For Cleaning English-9English-10 Checking before useOperation ranges Checking the usage time English-11Technical Specifications English-12Checking the name of the parts Main partsDisplay English-13English-14 Checking the remote controllerRemote controller buttons Remote controller display Battery changing timeStoring the remote controller Inserting the batteriesBasic function Press the button to adjust the temperature Press the button to set the desired fan speedEnglish-17 Basic fun n iotAdjusting the air flow direction Vertical air flowHorizontal air flow English-18Using the Fast function Using the Comfort functionEnglish-19 F03undAdvance n iotEnglish-20 When the air conditioner is on and in cool/heat modeMode Setting the On/Off timer Press the On Timer or Off Timer button to set the timePress the Set/Cancel button to activate it on English-21From the moment you have set the timer English-22If the air conditioner is on If the air conditioner is off Turn off automaticallyUsing the Single User function Using the Virus Doctor functionPress the button on the remote controller English-23Using the Auto Clean function Using the Filter resetWhen the air conditioner is turned on English-24Cleaning the air conditioner Cleaning the outdoor unit heat exchangerEnglish-25 Sre04 OthCleaning the Air filter Removing the Air filterEnglish-26 Remove the Air filter from the main bodyTop of the Air filter into the main body.. ➀ Reassembling the Air filterEnglish-27 Maintaining the air conditioner English-28Troubleshooting TemperatureAdjustment is not English-29Button or disconnect the power plug/switch Check the Drains have been cleared Regular MaintenanceError is indicated Heard when refrigerant flow movement changes. It is normalT05s In llan atio General informationEnglish-31 Choosing the installation location Installing the unitPower supply line, fuse or circuit breaker Indoor unitEnglish-33 Where sulfide gas existsOutdoor Unit When installing more than 1 outdoor unit When the air outlet is towards the wallEnglish-34  Figure DescriptionAccessories Accessories in the indoor unit caseEnglish-35 LlanAccessories in the outdoor unit case Optional accessoriesTools required for installation General Tools Tools for test operationsEnglish-37 Fixing the installation plateAssembling the hanger screw English-38 Removing the screwsRemoving the Cover panel Before mounting the indoor unit Assembling the Cover panel After mounting the indoor unit English-39Connecting the assembly cable Cable specificationConnecting the cable English-40English-41 Extend the assembly cable if necessaryEach wire is labeled with the corresponding terminal number English-42 Smooth the cut edgesCut off the remaining foam insulation TorqueEvacuating the indoor unit Cutting or extending the pipeEnglish-43 Unscrew the caps at the end of each pipeDepth a English-44Put a flare nut slightly into the pipe and modify the flare Drain hose installation English-45Change the direction only when it is necessary English-46Shield Downwards as seen in the pictureEvacuating the connected pipes English-47Connect a drain hose to the drain plug Drain hole Drain plugAdding Refrigerant English-48Outer Torque If you use a pipe longer than 5 mPerforming the gas leak tests English-49Outdoor unit installed on the wall by rack Fixing the outdoor unit in placeEnglish-50 660 340Smart Install mode English-51English-52 Off BlinkingFinal check and trial operation English-53How to connect your extended power cables English-54Apply heat to the contraction tube to contract it After tube contraction work is completed, wrap it withMGBETTERA3050IB&IMENDB68-04070A-00.indd 17/09/2013 Questions or COMMENTS? 0211

AR24HPSDBWKNMG, AR24HCSDBWKXMG, AR18HPSDBWKXMG, AR18HCSDBWKNMG, AR18HPSDBWKNMG specifications

Samsung has long been a leader in home appliances and HVAC solutions, and their range of air conditioners, including the AR18HCSDBWKXMG, AR24HPSDBWKXMG, AR24HCSDBWKNMG, AR18HPSDBWKNMG, and AR18HCSDBWKNMG, is no exception. These models combine innovative technology with user-friendly features to provide efficient cooling and heating options for any space.

One of the standout features of these models is Samsung's Digital Inverter technology. This technology allows the air conditioners to adjust their compressor speed to maintain the desired temperature more efficiently. By reducing energy consumption, the Digital Inverter technology not only helps in lowering utility bills but also minimizes noise levels, providing a more comfortable environment.

Another important aspect is the Smart Installation feature, which simplifies the setup process. Once the unit is installed, the system runs a diagnostic check to ensure everything is functioning correctly. This feature helps users avoid potential issues and provides peace of mind regarding their investment in a Samsung air conditioner.

The AR series also comes with Samsung's unique Wind-Free cooling technology. This innovation ensures that cool air is distributed uniformly throughout the room without the discomfort of cold drafts. The air flows through micro holes in the front panel, providing a gentle and consistent cooling experience.

Energy efficiency is a top priority for modern consumers, and these Samsung air conditioners are designed with eco-friendly R32 refrigerant. This refrigerant has a lower Global Warming Potential (GWP) compared to traditional refrigerants, making it a more sustainable choice for the environment.

In terms of design, these models boast a sleek and modern aesthetic that fits seamlessly into any interior decor. The easy-to-clean filters and anti-bacterial coating ensure that the air quality in your home is not compromised, providing a healthy living environment for you and your family.

Moreover, user convenience is enhanced with the presence of smart controls via Samsung's SmartThings app. Users can easily monitor and control their air conditioners from their smartphones, allowing for precise temperature management and efficiency even when away from home.

In conclusion, the Samsung AR18HCSDBWKXMG, AR24HPSDBWKXMG, AR24HCSDBWKNMG, AR18HPSDBWKNMG, and AR18HCSDBWKNMG air conditioners are designed with cutting-edge technology, energy efficiency, and user-friendly features in mind. These models not only enhance home comfort but also promote sustainability, making them an excellent choice for modern households looking to balance performance with environmental responsibility.
Top Page Image Contents