Samsung AR24HCSDBWKXMG, AR24HCSDBWKNMG, AR18HCSDBWKNMG, AR18HPSDBWKNMG English-52, Off Blinking

2) Smart Install mode in progress

•88 Display : Progress will be diplayed in 0~99..

•LED Display : Indicator on the indoor unit display will blink in sequence and then all indicators will blink.. (This will be repeated..)

TYPE	88 Display	LED Display
		LED1
Indoor unit indicator		LED2
		LED3

❋❋ Display may be different depending on the model..

3.Smart Install mode will end..

1)Smart Install mode will take approximately 7~13 minutes.. (Actual time may be different depending on the model..)

2)When Installation is successful : Smart Install mode will end with ringing sound and the air conditioner will be in standby status.. (Error message will not be displayed on the indoor unit indicator and the remote controller and buttons on the indoor unit will work normally..)

3)When installation is not successful : Smart Install mode will end and error message will be displayed on the indoor unit display..

1. Take necessary measures when error occurs.

--Refer to the service manual for necessary measures for each error that occurs.

2. Use the product after taking care of the error that occurs.

			Error indicator
				LED Display
	Display		LED 1	LED 2	LED 3		Error	Measures to take by an installer
					/	/
							Error on indoor	1. Check the connection of the connector
							temperature sensor
	,						Error on indoor heat	1. Check the connection of the connector
							exchanger
							Error on indoor fan	1. Check the connection of the connector
								2. Remove foreign substance (Check for the
							motor
								cause that restrains motor)
	display and all							1. Re-set options
	LED blinks						EEPROM/Option error
	,
								1. Check if the service valve is open
								2. Check for refrigerant leakage (pipe
								connections, heat exchanger) and charge
							Smart install error	refrigerant if necessary
							(blockage error/	3. Check if there's any blockage on
							refrigerant leakage)	refrigerant cycle (indoor unit/outdoor
								unit)
								4. Check if additional refrigerant has been
								added after pipe extension
❋❋	: Off /	: Blinking /		: On

English-52

MG_BETTER_A3050_IB&IM_EN_DB68-04070A-00.indd 52

17/09/2013 11:23:43