| Do not move the robotic vacuum cleaner holding the dustbin |
CAUTION | part. |
| - This may cause the dustbin to separate, resulting in injury or |
| serious damage to the product. |
| Vacuum cleaning robot may not be able to continue its |
NOTE | operation if it is stuck at the entrance or veranda doorsill. |
| - To resume operating, turn the Power Switch off and then on again |
| after moving it to a location where it can continue cleaning. |
| Vacuum cleaning robot cannot completely clean locations that |
NOTE | it cannot reach, such as corners, and spaces between sofas |
| and walls. |
| - Please clean these locations occasionally. |
| Dust clusters may remain after cleaning, when the vacuum cleaning robot fails to |
NOTE | pick up dust clusters that were formed while cleaning. |
-In this case, sweep up the dust with another cleaning tool.
CLEANING AND MAINTENANCE
When cleaning the product, do not spray water directly onto CAUTION the exterior or wipe it with a volatile material such as benzene,
thinner or alcohol.
- This may result in critical damage to the product.
The unit must not be disassembled or reconstructed by anyone CAUTION other than a qualified service engineer.
- This may result in damage to the product.
01 SAFETY INFORMATION
Remove any foreign substances accumulated on the Obstacle WARNING and Cliff sensors on a regular basis.
-Dirt accumulated on the sensors will result in inaccurate functioning of the sensors.
Cliff sensor |
Obstacle sensor |
safety information _11