Samsung VCR8980L4K/XEU manual Timer Reservation, Remote Control Configuration Sequence

Timer Reservation

In this mode, you can schedule the cleaner to start a once-off cleaning run from a particular time.

■ A scheduled cleaning run is only performed when the cleaner is docked to the charger station.

		Remote Control		Configuration Sequence
			1.	Press the Timer/Weekly
				button.
			-	The current setting is
				displayed and		blinks.
	Blinks			Press the Y or Z button to
		Decrease	Increase	set the hour.
			❈	Cleaning Mode
Blinks			-	If there is no previous
				reservation, the cleaning
				mode is set to Auto mode. If
				a reservation exists, cleaning
				mode is set to the confi gured
				mode.
			2.	Press the Timer/Weekly
		Decrease	Increase	button.
			-	The time increases/decreases
Blinks	Blinks			by 5 minutes. Press the Y or
				Z button to set the minutes.
			3.	Press the Timer/Weekly
		Decrease	Increase	button. Press the Y or Z
				button to set the cleaning
				mode.
Blinks	Blinks		-	You can select either Auto or
				Max cleaning mode.
			4.	Press the Timer/Weekly
	Blinks			button.
			-	The value you set will
				blink and the settings are
				completed.
Blinks			-	When the settings are
				completed, the confi gured
				time and	are displayed.
		- If you press the Start/Stop button while the cleaner is charging
Canceling the Settings		or you are setting the time, the settings are canceled.
		- Please take note that the settings are canceled if the cleaner
		is detached from the charger station.
	Timeout	- If there is no input for 1 minute while you are setting the time,
		the cleaner exits Time Set mode automatically.

34_ operating