USING THE VACUUM CLEANING ROBOT
Starting/Stopping Cleaning
You can run or stop all vacuum cleaning robot functions.
■ Each vacuum cleaning robot function only runs when the Power Switch is turned on.
■ When the vacuum cleaning robot is operating, press the (
) button to cancel the operation and select a function.
Turning the power on or off
Turning the power on
- Main unit: Press the (
) button.
Turning the power off
-Remote control: Press the [Power] button.
- Main unit: Press and hold the (
) button down for 3 seconds.
❈ If no key is pressed for approximately 1 minute after turning the power on, the power is automatically cut to prevent the battery discharging. To turn the power on again, press and hold the power (Start/Stop) button on the main body.
Using the remote
control
Starting or stopping cleaning
Starting
-Remote control : Press the Auto, Spot, Max, Manual button.
-Main unit : Select Auto, Spot, Max mode by using the (
) button and then pressing the (
) button.
-When cleaning begins, the vacuum cleaning robot starts to move.
❈Pressing the (
) button without selecting cleaning mode starts
to perform the Auto mode cleaning.
Stopping
-To stop, press the (
) remote control or main unit button.
-When cleaning is stopped, the vacuum cleaning robot stops.
Using the main unit
buttons
28_ operating