Samsung VCR8980L4K/XEU manual Before USE, Material such as, Open all doors to clean all rooms

Page 7

BEFORE USE

 

 

Before activating the vacuum cleaning robot, make sure that

 

CAUTION

the dust bin is assembled.

 

 

- If the dust bin is not inserted, vacuum cleaning robot will not

01

 

operate.

 

Never use vacuum cleaning robot in locations with combustible

SAFETY

 

INFORMATION

 

burning cigarettes, etc.

CAUTION

material such as.

 

 

- Locations with candles or desk lamps on the fl oor.

 

 

- Locations with unattended fi res (fi re or embers).

 

 

- Locations with gasoline, distilled alcohol, thinner, ashtrays with

 

Vacuum cleaning robot is for domestic use only. Do not use it in the following CAUTION locations.

-Attics, basements, warehouses, industrial buildings, separate rooms distant from the main building, locations exposed to wet or damp conditions such as bathrooms or wash rooms, and narrow and highly situated locations such as tables or shelves. Critical damage (abnormal operation and breakage) may occur when used in these locations.

Open all doors to clean all rooms.

CAUTION - When a door is closed, the vacuum cleaning robot will not be able to enter that room.

-However, make sure to close the doors to the main entrance, the veranda and the bathroom, and any other rooms where the vacuum cleaning robot may fall to a lower fl oor.

Do not use the cleaner on a black floor.

CAUTION - The vacuum cleaning robot may not run normally in this case.

For carpets with long tassels, fold the tassels under the carpet.

CAUTION

- Unfolded tassels may result in critical damage to the carpet and

 

 

the machine itself, as they get caught in the driving wheel or the

 

 

power brush.

 

 

 

 

 

 

 

When the cliff sensor is polluted, the vacuum cleaning robot

 

 

 

 

 

CAUTION

may be in danger of falling down the stairs.

This may cause personal injury and critical damage to the product.

To prevent risk, install the VIRTUAL GUARDs (Fence Mode setting) in front of dagerous areas. Clean the sensor window and camera.

safety information _07

Image 7
Contents Vacuum Cleaning Robot Safety Information Safety informationGeneral Important Safety InstructionsVacuum Cleaning Robot Contents Do not use a damaged power cord, plug, or a loose power Power RelatedThis may result in fi re or electric shock Before USE Open all doors to clean all roomsMaterial such as Always keep the power cord of the charger plugged into Remove objects scattered on the floor before cleaningMake sure that there is no trace of liquids on the charger Cleaning robot from auto-charging itselfMake sure the vacuum cleaning robot does not vacuum or Objects in front of the charger will prevent the vacuumThis may result in damage to carpets You cannot use the vacuum cleaning robot on thick carpetsThis may result in damage when the unit accidentally drops USECleaning and Maintenance Edge-cleaning side What is ceiling shape recognition Visionary mapping plus? Product featuresDelicate Cleaning of Every Corner Various Cleaning ModesDoorsill Crossing Auto Dust Emptying Function of the Vacuum Cleaning RobotSafety Device Auto ChargingComponents Assembling the cleanerMain Body Remote Control Charger Station Others Components Quick Start Guide Accessory for CarpetMain unit Name of Each PartInstalling the batteries Installing the Remote Control Batterise Button Part Display PartDisplay panel Turning the Power Switch on or off Operating the cleanerInstalling the Vacuum Cleaning Robot Installation orderOperating Installing the chargerAttaching the carpet accessory Learn about how to use the Auto Empty functionTurn on the Power button Charging Main unit until you hear a Recharging powerRobot manually Battery and will run for about 100 minutes About the BatteryBattery warranty period is 6 months from the date Purchase Remote Control Setting the TimeButton operations Installing the Virtual GuardForming a Fence virtual wall About the IrDA sensor When controlling the vacuum cleaning robotStarting or stopping cleaning Using the Vacuum Cleaning RobotStarting/Stopping Cleaning Turning the power on or offPress the Recharging button RechargingButton Auto CleaningSet the mode About the Resume Cleaning functionSpot Cleaning Cancel the mode Max CleaningCleaning again from the beginning Turbo icon is turned on, you can start cleaning in Turbo Manual CleaningRemote control button Set the mode Cancel the modeRemote Control Configuration Sequence Timer ReservationWeekly Reservation Cleaner exits reservation setting mode Repeat cleaning modeSettings are completed After the settings areAdditional Functions Using additional functionsTurbo Mode Dust Sensor ModeMaintain tools and fi lters Cleaning the Vacuum Cleaning RobotPlease keep the cleaning and maintenance methods in mind Cleaning the Sensor Window and the CameraFirst, empty the dust bin before cleaning it Cleaning the Dust Bin and the FiltersAfter cleaning it with water Emptying the AUTO-EMPTIER Dustbin Cleaning the Cyclone of the AUTO-EMPTIER DustbinDustbin Cleaning the Filter of the AUTO-EMPTIER DustbinClean the fi lter with water Remove the fi lter fromCleaning the Bottom of the AUTO-EMPTIER Cleaning the lower side of the Auto-Emptier periodically Cleaning the Power BrushDust bin fi rst before cleaning the power brush Picks or cotton swabs Cleaning the Edge-Cleaning Side rotating Brush Cleaning the Driving Wheel Checklist Before SVC Calls TroubleshootingSymptom Checklist Measure to Take Time of the Virtual Battery usageCharger Virtual GuardDoes not empty Robot frequentlyCollides with Autoemptier Auto-emptierError Code Cause Solution Troubleshooting for Error CodesMain Body Charger Station Cleaning methodMain unit button type Copyright c 2006, 2008, 2009, 2010 Edward Rosten Open Source AnnouncementMemo Memo Memo Samsung Country Customer Care Center Web Site0860 7267864 Samsung