Samsung VCR8980L4K/XEU manual Objects in front of the charger will prevent the vacuum

Page 9

Install the charger in a location that can be easily accessed by CAUTION the vacuum cleaning robot.

-If the charger is installed in a corner, this may cause extra movements and may disturb the automatic recharging process.

 

Objects in front of the charger will prevent the vacuum

 

 

about

0.5m

 

CAUTION

cleaning robot from auto-charging itself.

 

 

 

 

about

0.5m

 

 

 

 

 

-

Clear the area.

 

 

 

 

 

 

 

 

about

 

 

 

 

 

 

 

 

1m

 

 

 

 

 

 

 

 

 

 

 

There should be no obstacles and cliffs 0.5m to the left and

 

 

 

 

 

 

WARNING

right and within 1m of the front.

 

0.5m

 

 

about

0.5m

 

 

 

about

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

about

1m

 

 

 

 

 

 

 

 

Do not short-circuit the charge pins with metal objects such

WARNING as chopsticks, screwdrivers, and etc.

-This will result in critical damage to the charger.

01 SAFETY INFORMATION

Make sure that there is no trace of liquids on the charger

WARNING station.

- Failing to do so may result in fi re or electric shock.

Make sure the vacuum cleaning robot does not vacuum or

WARNING move over liquids such as water, oil or pet litter.

- This may result in critical damage to the product.

- Liquids may spread through the wheels resulting in contamination.

Do not use the charger for other purposes.

WARNING - This may result in critical damage to the charger or cause a fi re.

Do not install the charger station on a dark floor.

WARNING - If the fl oor where the charger station is installed is dark, it is hard for the vacuum cleaning robot to return to it.

safety information _09

Image 9
Contents Vacuum Cleaning Robot Safety Information Safety informationGeneral Important Safety InstructionsVacuum Cleaning Robot Contents Power Related Do not use a damaged power cord, plug, or a loose powerThis may result in fi re or electric shock Open all doors to clean all rooms Before USEMaterial such as Always keep the power cord of the charger plugged into Remove objects scattered on the floor before cleaningMake sure the vacuum cleaning robot does not vacuum or Cleaning robot from auto-charging itselfObjects in front of the charger will prevent the vacuum Make sure that there is no trace of liquids on the chargerThis may result in damage when the unit accidentally drops You cannot use the vacuum cleaning robot on thick carpetsUSE This may result in damage to carpetsCleaning and Maintenance Edge-cleaning side Delicate Cleaning of Every Corner Product featuresVarious Cleaning Modes What is ceiling shape recognition Visionary mapping plus?Safety Device Auto Dust Emptying Function of the Vacuum Cleaning RobotAuto Charging Doorsill CrossingMain Body Remote Control Charger Station Others Components Assembling the cleanerQuick Start Guide Accessory for Carpet ComponentsMain unit Name of Each PartInstalling the batteries Installing the Remote Control Batterise Display Part Button PartDisplay panel Installing the Vacuum Cleaning Robot Operating the cleanerInstallation order Turning the Power Switch on or offOperating Installing the chargerLearn about how to use the Auto Empty function Attaching the carpet accessoryTurn on the Power button Main unit until you hear a Recharging power ChargingRobot manually About the Battery Battery and will run for about 100 minutesBattery warranty period is 6 months from the date Purchase Remote Control Setting the TimeInstalling the Virtual Guard Button operationsForming a Fence virtual wall About the IrDA sensor When controlling the vacuum cleaning robotStarting/Stopping Cleaning Using the Vacuum Cleaning RobotTurning the power on or off Starting or stopping cleaningPress the Recharging button RechargingSet the mode Auto CleaningAbout the Resume Cleaning function ButtonSpot Cleaning Max Cleaning Cancel the modeCleaning again from the beginning Remote control button Manual CleaningSet the mode Cancel the mode Turbo icon is turned on, you can start cleaning in TurboRemote Control Configuration Sequence Timer ReservationWeekly Reservation Settings are completed Repeat cleaning modeAfter the settings are Cleaner exits reservation setting modeTurbo Mode Using additional functionsDust Sensor Mode Additional FunctionsPlease keep the cleaning and maintenance methods in mind Cleaning the Vacuum Cleaning RobotCleaning the Sensor Window and the Camera Maintain tools and fi ltersCleaning the Dust Bin and the Filters First, empty the dust bin before cleaning itAfter cleaning it with water Emptying the AUTO-EMPTIER Dustbin Cleaning the Cyclone of the AUTO-EMPTIER DustbinClean the fi lter with water Cleaning the Filter of the AUTO-EMPTIER DustbinRemove the fi lter from DustbinCleaning the Bottom of the AUTO-EMPTIER Cleaning the Power Brush Cleaning the lower side of the Auto-Emptier periodicallyDust bin fi rst before cleaning the power brush Picks or cotton swabs Cleaning the Edge-Cleaning Side rotating Brush Cleaning the Driving Wheel Troubleshooting Checklist Before SVC CallsSymptom Checklist Measure to Take Charger Battery usageVirtual Guard Time of the VirtualCollides with Robot frequentlyAutoemptier Auto-emptier Does not emptyError Code Cause Solution Troubleshooting for Error CodesCleaning method Main Body Charger StationMain unit button type Copyright c 2006, 2008, 2009, 2010 Edward Rosten Open Source AnnouncementMemo Memo Memo Country Customer Care Center Web Site Samsung0860 7267864 Samsung