Samsung UE40H6410SSXZG, UE55H6410SSXXH manual Brightness, Storage and Maintenance, 20.2, 20.8

Standard dimensions for wall mount kits are shown in the table below. When using a third-party wall mount, note that the assembling screw length(C) is shown below.

Product	Inches	VESA Spec.(A * B)	C (mm)		Standard	Quantity	English
Family					Screw
	32	200 x 200	20	~ 21
	40		20.2	~ 21.2
LED-TV					M8	4
	48		20.8	~ 21.8
		400 x 400
	55		20.2	~ 21.2

[[ Do not install your Wall Mount Kit with your TV is On. This may lead to personal injury caused by electric shock.

Cautions about Eco Sensor and Screen

Brightness

The Eco Sensor measures the light in the room and optimises the brightness of the TV automatically to reduce power consumption. This causes the TV to brighten and dim automatically. To turn this function off, go to System > Eco Solution > Eco Sensor.

-- If the screen is too dark while watching TV in a dark environment, this may be because the Eco Sensor function is on. -- Do not block the sensor with any material. This may decrease the screen brightness.

Storage and Maintenance

-- If a sticker was attached to the TV screen, some debris may remain after you remove the sticker. Please clean the debris off before watching TV.

-- The exterior and screen of the product can get scratched while cleaning it. Be sure to wipe the exterior and screen carefully using a piece of soft cloth to prevent scratches.

Do not spray water directly onto the product. Any liquid that enters the product may result in product failure, fire, or electric shock.

Clean the product with a piece of soft damp cloth wet with a small amount of water. Do not use flammable liquids, such as benzene and thinners, and cleaning agents.

English - 5