Installation in the cabinet
With
1 |
| 545 |
|
|
| 560 | |
|
|
| |
| 595 |
| 572 |
|
|
| |
|
| 595 | 21 |
|
|
|
3 | min. | min. 560 |
550 |
min. 50 | min. 600 |
| |
Lower element |
|
2 | Lower |
| Top |
| element |
| element |
Airflow through the ventilation gap | |||
4 |
|
|
|
| min. 590 | 50 | min. 550 |
|
|
min. 560
Top element
There should be a ventilation gap in the base of the kitchen cabinet where the oven is to be placed. For ventilation, a gap of about 50mm should be left between the lower shelf and the supporting wall. If the oven is to be installed below a hob, the hob’s installation instructions should be followed.
5 |
Push the appliance completely into the cabinet and fix the oven firmly on both sides using 2 screws. Make sure that a gap of at least 5mm should be left between the appliance and the adjacent cabinet.
After installation, remove the vinyl protective film, tape, paper and accessories from the door and inside of oven. Before uninstalling the oven from the furniture, disconnect the oven from the power supply and release the 2 screws on the both sides of the oven.
WARNING: The
The front exterior of the oven such as handle is different model by model. But the size of the oven in the picture is same.
English - 10
|