Samsung CTN464KC01/XEO manual Before you begin, Hob use, Temperature detection, Initial cleaning

Page 20

Temperature detection

If for any reason the temperatures on any of the cooking zones were to exceed the safety levels, should this happen then the cooking zone will automatically reduce to a lower power level.

When you have finished using the hob, the cooling fan will continue to run until the hob’s electronics has cooled down. And the cooling fan switched itself on and off depending upon the termperature of the electronics.

before you begin

Initial cleaning

Wipe the ceramic glass surface with a damp cloth and ceramic cooktop glass cleaner. Do not use caustic or abrasive cleaners. The surface could be damaged.

WARNING

hob use

Cookware for induction cooking zones

The induction hob can only be turned on when a cookware with a magnetic base is placed on one of the cooking zones. You can use the following suitable cookware.

Cookware material

Cookware material

Suitable

 

 

Steel, Enamelled steel

Yes

 

 

Cast iron

Yes

 

 

Stainless steel

If appropriately labelled by the manufacturer

 

 

Aluminium, Copper, Brass

No

 

 

Glass, Ceramic, Porcelain

No

 

 

Cookware for induction hob is labelled as suitable by the manufacturer.

Certain cookware can make noise when being used on induction cooking zones. These noise are not a fault in the appliance and do not affect operation in any way.

20_ before you begin

CTN464KC01_BOL_DG68-00454A-02_EN_121129.indd 20

2012-11-29 �� 5:17:07

Image 20
Contents Induction Hob Using this manual Important safety symbols and precautionsSafety instructions Safety instructionsSafety instructions Safety instructions Safety instructions Safety instructions Failure to do so may result in electric shock Safety instructions Disposal instructions Applicable in countries with separate collection systemsContents Regulations and compliance Installing the hobSafety instructions for the installer Connecting to the mains power supply 1N ~ 2N ~Installing into the countertop 100 Control panel Parts and featuresCooking zones Components Induction heatingKey features of your appliance Other reasons why a cooking zone will switch itself off Safety shutoffResidual heat indicator Temperature detection Initial cleaningBefore you begin Hob useOperating noises Suitability testSize of pans Energy saving tips Using suitable cookwareUsing the touch control sensors Switching the appliance off Switching the appliance onSelect cooking zone and heat setting Switching the child safety lock on / off Switching a cooking zone offUsing the child safety lock Timer Setting the safety shutoffBridge Control Power boost controlCountdown timer Auto heat up Power Management Suggested settings for cooking specific foodsCleaning and care HobLight Soiling Stubborn SoilingTo avoid damaging your appliance Problem DirtHob frame option Warranty and service FAQs and troubleshootingService Is it a technical fault?Technical data Technical dataCTN464KC01BOLDG68-00454A-02EN121129.indd 2012-11-29 CTN464KC01BOLDG68-00454A-02EN121129.indd 2012-11-29 Code No. DG68-00454A-02
Related manuals
Manual 160 pages 2.38 Kb Manual 72 pages 15.35 Kb Manual 72 pages 48.79 Kb