Samsung CTN464KC01/XEO, CTN464KC01/BOL manual Service, Is it a technical fault?

Page 32

What should I do if the display is illuminated?

Check for the following:

The hob is overheated because of abnormal operation.

After hob is cooled down, press the “On/Off” control sensor for resetting.

What should I do if the display is illuminated?

Check for the following:

Cookware is unsuitable or too small or no cookware has been placed on the cooking zone

If you use suitable cookware, displayed message will automatically disapear.

What should I do if the cooling fan runs after the hob is turned off?

Check for the following:

When you have finished using the hob, the cooling fan runs by itself for cooling down.

After the hob’s electronics has cooled down, the cooling fan will be turned off.

If you request a service call because of an error made in operating the appliance, the visit from the customer service technician may incur a charge even during the

warranty period.

Service

Before calling for assistance or service, please check the section “Troubleshooting.” If you still need help, follow the instructions below.

Is it a technical fault?

If so, please contact your customer service centre.

Always prepare in advance for the discussion. This will ease the process of diagnosing the problem and also make it easier to decide if a customer service visit is necessary.

Please take note of the following information.

What form does the problem take?

Under what circumstances does the problem occur?

When calling, please know the model and serial number of your appliance. This information is provided on the rating plate as follows:

Model description

S/N code (15 digits)

We recommend that you record the information here for easy reference.

Model:

Serial number:

When do you incur costs even during the warranty period?

if you could have remedied the problem yourself by applying one of the solutions provided in the section “Troubleshooting”.

if the customer service technician has to make several service calls because he was not provided with all of the relevant information before his visit and as a result, for example, has to make additional trips for parts. Preparing for your phone call as described above will save you the cost of these trips.

32_ warranty and service

CTN464KC01_BOL_DG68-00454A-02_EN_121129.indd 32

2012-11-29 �� 5:17:15

Image 32
Contents Induction Hob Using this manual Important safety symbols and precautionsSafety instructions Safety instructionsSafety instructions Safety instructions Safety instructions Safety instructions Failure to do so may result in electric shock Safety instructions Disposal instructions Applicable in countries with separate collection systemsContents Regulations and compliance Installing the hobSafety instructions for the installer Connecting to the mains power supply 1N ~ 2N ~Installing into the countertop 100 Control panel Parts and featuresCooking zones Components Induction heatingKey features of your appliance Other reasons why a cooking zone will switch itself off Safety shutoffResidual heat indicator Temperature detection Initial cleaningBefore you begin Hob useOperating noises Suitability testSize of pans Energy saving tips Using suitable cookwareUsing the touch control sensors Switching the appliance off Switching the appliance onSelect cooking zone and heat setting Switching the child safety lock on / off Switching a cooking zone offUsing the child safety lock Timer Setting the safety shutoffBridge Control Power boost controlCountdown timer Auto heat up Power Management Suggested settings for cooking specific foodsCleaning and care HobLight Soiling Stubborn SoilingTo avoid damaging your appliance Problem DirtHob frame option Warranty and service FAQs and troubleshootingService Is it a technical fault?Technical data Technical dataCTN464KC01BOLDG68-00454A-02EN121129.indd 2012-11-29 CTN464KC01BOLDG68-00454A-02EN121129.indd 2012-11-29 Code No. DG68-00454A-02
Related manuals
Manual 160 pages 2.38 Kb Manual 72 pages 15.35 Kb Manual 72 pages 48.79 Kb