Switching the appliance on
1.Touch the Lock control 
sensor for approximately 3 seconds.
2. The appliance is switched on using the On/Off | approx | ||
control | sensor. | ||
1 sec. | |||
Touch the On/Off control 
sensor for 1 second.
The digital displays will show 
.
After the On/Off control 
sensor has been actuated to switch on your appliance, a heat setting must be selected within approximately 10 seconds. Otherwise, the appliance will switch itself off for safety reasons.
Select cooking zone and heat setting
1. For selecting the cooking zone, touch the corresponding cooking zone’s key.
2.For setting and adjusting the power level,
touch the Heat setting selectors.
If more than one sensor is pressed for longer than 8 seconds, 
will
show in the heat setting display. To reset, touch the On/Off control 
sensor.
Switching the appliance off
To completely switch off the appliance, use the
On/Off control 
sensor.
Touch the On/Off control 
sensor.
se hob u
After switching off a single cooking zone or the entire cooking surface, the presence of residual heat will be indicated in the digital displays of the corresponding cooking zones in the form of an 
(for “hot”).
hob use _23
5:17:09