Samsung CTN464KC01/BOL, CTN464KC01/XEO manual Safety instructions

Page 5

WARNING Severe warning signs for installation

The installation of this appliance must be performed by a qualified hob service technician trained by the manufacturer. Please see the section “Installing your Hob”.

Plug the power cord into the proper wall socket or higher and use the socket for this appliance only. Plug the power plug into the wall socket firmly. In addition, do not use an extension cord.

-Failure to do so and sharing a wall socket with other appliances using a power strip or extending the power cord may result in electric shock or fire.

-Do not use an electric transformer. It may result in electric shock or fire.

The installation of this appliance must be performed by a qualified technician or service company.

-Failing to do so may result in electric shock, fire, an explosion, problems with the product, or injury.

Appliance should allow to disconnection of the appliance from the supply after installation. The disconnection may be achieved by having the plug accessible or by incorporating a switch in the fixed wiring in accordance with the wiring rules.

Do not install this appliance near a heater, inflammable material.

Do not install this appliance in a humid, oily or dusty location, in a location exposed to direct sunlight and water (rain drops).

Do not install this appliance in a location where gas may leak. - This may result in electric shock or fire.

The appliance is not intended for installing in road vehicles, caravans and similar vehicles etc.

This appliance must be properly grounded.

Do not ground the appliance to a gas pipe, plastic water pipe, or telephone line.

-This may result in electric shock, fire, an explosion, or problems with the product.

-Never plug the power cord into a socket that is not grounded correctly and make sure that it is in accordance with local and national codes.

CAUTION Caution signs for installation

This appliance should be positioned in such a way that it is accessible to the power plug. - Failure to do so may result in electric shock or fire due to electric leakage.

Install your appliance on a level and hard floor that can support its weight.

-Failure to do so may result in abnormal vibrations, noise, or problems with the product. Install the appliance while maintaining the proper distance from the wall.

-Failure to do so may result in fire due to overheating.

The minimum height of free space necessary above the top surface of the hob

WARNING Severe warning signs for electric

Remove all foreign substances such as dust or water from the power plug terminals and contact points using a dry cloth on a regular basis.

-Unplug the power plug and clean it with a dry cloth.

-Failure to do so may result in electric shock or fire.

nso ctiru yinst afets

safety instructions _5

CTN464KC01_BOL_DG68-00454A-02_EN_121129.indd 5

2012-11-29 �� 5:17:01

Image 5
Contents Induction Hob Important safety symbols and precautions Using this manualSafety instructions Safety instructionsSafety instructions Safety instructions Safety instructions Safety instructions Failure to do so may result in electric shock Safety instructions Applicable in countries with separate collection systems Disposal instructionsContents Regulations and compliance Installing the hobSafety instructions for the installer 1N ~ 2N ~ Connecting to the mains power supplyInstalling into the countertop 100 Control panel Parts and featuresCooking zones Induction heating ComponentsKey features of your appliance Other reasons why a cooking zone will switch itself off Safety shutoffResidual heat indicator Initial cleaning Temperature detectionBefore you begin Hob useOperating noises Suitability testSize of pans Energy saving tips Using suitable cookwareUsing the touch control sensors Switching the appliance off Switching the appliance onSelect cooking zone and heat setting Switching the child safety lock on / off Switching a cooking zone offUsing the child safety lock Setting the safety shutoff TimerBridge Control Power boost controlCountdown timer Auto heat up Suggested settings for cooking specific foods Power ManagementHob Cleaning and careLight Soiling Stubborn SoilingTo avoid damaging your appliance Problem DirtHob frame option FAQs and troubleshooting Warranty and serviceIs it a technical fault? ServiceTechnical data Technical dataCTN464KC01BOLDG68-00454A-02EN121129.indd 2012-11-29 CTN464KC01BOLDG68-00454A-02EN121129.indd 2012-11-29 Code No. DG68-00454A-02
Related manuals
Manual 160 pages 2.38 Kb Manual 72 pages 15.35 Kb Manual 72 pages 48.79 Kb