REVERSING THE REFRIGERATOR DOOR
Samsung recommends that reversing of WARNING the door opening is only completed by
Samsung approved Service providers. This will be on a chargeable basis and at the customers expense.
Any damage caused while attempting to reverse the door opening is not covered under the appliance manufactures warranty.
Any repairs requested due to this circumstance will be completed on a chargeable basis at the customers expense.
Required Tools (Not provided)
2.Remove the plastic cover and make sure to disconnect the wire connected to it.
After removing the plastic cover, check the parts for reversing the door.
up setting
Be careful not to damage the electrical CAUTION wires when removing the plastic cover.
3. Disconnect the wires and then remove 3 bolts.
Phillips Head | Flat Head Driver | 10 mm Socket | |
Wrench | |||
Driver (+) | |||
(for bolts) | |||
|
| ||
8 mm Socket |
| 5 mm Hex | |
Spanner | Wrench | ||
Wrench | |||
(for hinge shaft) | (for bottom hinge | ||
(for bolts) | |||
| shaft) | ||
|
|
Make sure your refrigerator is unplugged WARNING before handling electrical wires.
4.Remove the door from the lower hinge by carefully lifting the door straight up.
1. Remove 4 screws on the top of the refrigerator.
WARNING
Refrigerator door is heavy, be careful not to injure yourself when removing the refrigerator door.
English - 13
15. 5. 11. |
�� 3:41