5. Separate the front leg cover after removing | 9. Remove the screws on the bottom left and right |
2 screws. | side of the refrigerator door. |
| Switch the side of the door stopper from right |
| to the left. |
Screw | Hinge riser should be switched as well. |
6.Unscrew 3 bolts tightening the hinge and also unscrew 3 bolts on the bottom left side by the front leg where removed hinge will be attached.
10 mm 
10 mm
Hinge riser | Hinge riser | |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
10.Remove the wire cover on top of the refrigerator door to switch the side of the wires.
7.Separate the hinge shaft by using hex wrench first. Unscrew the bolt to remove the hinge riser and switch the side of the hinge shaft and the hinge riser.
Hinge shaft
Hinge riser 8 mm Bolt
8.Attach the hinge on the bottom left side of the refrigerator where bolts were previously removed in step 6.
Screw the bolts that were removed on the bottom right side of the refrigerator for the future usage.
Switch the the Leg from the left to right.
10 mm 
10 mm 
11.Remove the hinge and the grommet from the refrigerator door.
Detach the right side hinge cover and pull the wires out of the hinge cover.
Hinge cover 
Grommet 
Be careful not to damage the electrical CAUTION wires when removing the hinge cover.
English - 14
15. 5. 11. |
��
3:41