Garmin FA168CPS manual Arming Commands, Modes of Arming Press these keys… Keypad Confirms By…

Page 16

Arming the System

Arming Commands

Before arming, close all perimeter doors and windows and make sure the Ready to Arm message is displayed.

Modes of Arming

Mode

Press these keys…

Keypad Confirms By…

Stay

security code + [3] (STAY)

• three beeps†

 

 

• armed STAY message displayed

 

 

• red ARMED indicator lights

 

 

 

Night-Stay

security code + [3] + [3]

• three beeps†

 

 

• NIGHT-STAY message displayed

 

 

• red ARMED indicator lights

Instant

security code + [7] (INSTANT)

• three beeps†

 

 

• armed STAY message displayed

 

 

• red ARMED indicator lights

 

 

• also note that entry delay is turned off.

Away

security code + [2] (AWAY)

• two beeps†, or, if programmed, beeping for

 

 

duration of exit delay

 

 

• armed AWAY message displayed

 

 

• red ARMED indicator lights

 

 

Leave the premises through an entry/exit

 

 

door during the exit delay period to avoid

 

 

causing an alarm. The keypad beeps rapidly

 

 

during the last 10 seconds of the exit delay

 

 

to warn you that it is ending.

Maximum

security code + [4] (MAXIMUM)

• same as Away (described above)

 

 

Note that entry delay is turned off.

†Arming Ding: In addition to the keypad beeps, the external sounder emits a short “ding” sound after arming, if programmed to do so. The ding confirms that the system is armed, and may occur immediately after the command or be delayed (until arm/disarm report is sent or exit delay expires). Ask your installer about how this feature is set for your system.

Quick Arming

If "Quick Arming" was programmed by the installer, the [#] key can be pressed in place of the security code when arming the system in any of its arming modes (except Night- Stay). However, the security code must always be used when manually disarming the system.

Function Key Arming

For any arming command, a function key may have also been programmed for your system. If so, you can press and hold the appropriate function key for 2 seconds to arm the system. See your installer for the designated functions (see Single Button Arming section).

Refer to the Accessing Other Partitions section for information on multi-partition arming (FA168CPS).

– 16 –

Page 15 Page 17
Image 16
Page 15 Page 17
Contents FA168CPS / FA168CPSSIA FA148CP / FA148CPSIA About This Manual Table of Contents Using Device Commands Paging Feature Event Logging ProceduresPanic Keys Macro Key Programming & Usage Security Codes & Authority LevelsIntroduction System OverviewSystem Basics Alarms Memory of AlarmZones and Partitions Arming, Step-Arming and Disarming Burglary ProtectionPhone Access Using the Voice Message Center if Voice Keypad is installedMessage Center Functions About The Keypads General InformationFixed-Word Display Keypad Functions of the Keypads Display WindowStay Exit Delay Entry/Exit DelaysEntry Delay Exit Alarms Exit Error ConditionsTo turn the Voice Status feature on/off # Using the ∗ KeyChecking For Open Zones Arming the System Arming Commands Modes of Arming Press these keys… Keypad Confirms By…Quick Arming Function Key ArmingSingle Button Arming Step Arming FeatureKey First Press Second Press Third Press Using the Keyswitch Using the KeyswitchTo arm in the Away mode To arm in the Stay modeDisarming and Silencing Alarms Using the OFF keyUsing the Bypass Key Bypassing Protection ZonesQuick Bypass Chime Mode To turn Chime Mode onTo turn Chime Mode off To turn Voice Chime Mode on or offDate and Time Setting the Date and TimeViewing the Current Date and Time Using Panic Keys This Function Sends this signal With This Sounding…Panic Keys To activate a Panic FunctionMacro Key Programming & Usage About Macro KeysUsing a Programmed Macro Key Example of Macro ProgrammingUsing Device Commands About Device CommandsTo Activate Devices To Deactivate DevicesPaging Feature About Automatic PagingManual Paging Latch Key PagingAbout Security Codes Security Codes & Authority LevelsAuthority Level Definitions How to Assign Security Codes and Attributes Accessing Other Partitions FA168CPS About Accessing PartitionsUsing the GoTo Command Accessing Other PartitionsMulti-Partition Arming Common Zone Operation About Scheduling SchedulingCreating Schedules Group Number Partition Start Smtwtfs Event Logging Procedures About Event LoggingViewing the Event Log Understanding the Type of Event DisplayedTesting the System To Be Conducted Weekly About Testing the SystemCheck and Battery Displays Trouble ConditionsAlarm FaultRcvr Jam Or CheckBusy-Standby Long Rng TrblSilencing Low Battery Warning Tones at Keypad Maintaining Your SystemFire Alarm System If Installed This Section Applies only to Residential SystemsEmergency Individual Keys Or Key PairsKitchen Dining Emergency Evacuation Function Procedure Comments Quick Guide to Basic System FunctionsSummary of Audible/Visual Notifications Fixed-Word Display KeypadsSummary of Audible/Visual Notifications Regulatory Statements and Warnings Federal Communications Commission FCC Part 15 StatementRegulatory Statements Charts of Your System’s Features Function Keys CommentsCharts of Your System’s Features User User’s Parts Security Auth Access RF Zone Pager No. † Paging Setup List of Output Devices Page Page Page Page OWNER’S Insurance Premium Credit Request Cont Limitations of this System ÊK5309-5V5MŠ

FA168CPS specifications

The Garmin FA168CPS is an advanced navigation device designed primarily for marine use, offering a multitude of features tailored to enhance the user experience on the water. One of its standout characteristics is its high-resolution, sunlight-readable display, which ensures optimal visibility even in bright conditions. The screen is designed to provide clear, detailed maps and graphical data, making navigation easier and more efficient for boaters and sailors alike.

Equipped with GPS and GLONASS technology, the FA168CPS delivers rapid and precise positioning capabilities. This dual-satellite system enhances reliability and coverage, particularly in challenging maritime environments. The device also incorporates a built-in Fishfinder, allowing anglers to locate fish with ease. With advanced sonar capabilities, including CHIRP technology, users can distinguish between different types of fish and underwater structures, significantly increasing their chances of successful fishing trips.

One of the key features of the Garmin FA168CPS is its compatibility with various marine networks. It supports NMEA 2000 for seamless connectivity with other marine devices, allowing users to integrate their navigation system with autopilots, engines, and sensors for streamlined operation. This interoperability enhances situational awareness and greatly improves safety on the water.

Additionally, the FA168CPS comes with preloaded maps and charts, offering comprehensive coverage for coastal and inland waters. The device can also be upgraded with additional Garmin BlueChart g3 maps, providing users with the most up-to-date navigational data, including buoy locations, tidal information, and depth contours.

Among its user-friendly characteristics, the Garmin FA168CPS features intuitive menus and customizable screen layouts, allowing users to personalize their navigation experience. Its robust construction ensures durability in marine environments, making it resistant to water and other harsh conditions. The device is also designed for easy installation, ensuring that boaters can set it up quickly and get right to their adventures.

In summary, the Garmin FA168CPS combines cutting-edge technology with practical features to provide a comprehensive marine navigation solution. From its excellent display and advanced sonar capabilities to its compatibility with marine networks and customizable user interface, this device is an essential tool for anyone looking to navigate the waters with confidence and precision.
Top Page Image Contents