Garmin FA168CPS manual About Scheduling, Creating Schedules

Page 35
1 DISARMED READY TO ARM
ENTER SCHED NO.
00=QUIT 00
ENTER EVENT CLEAR EVENT 00

Scheduling

About Scheduling

The system provides end-user schedules (programmable by master/installer only), which can control various types of events.

•Each schedule causes a defined event to start and stop (when appropriate) at a specified time.

•Schedules can be set to automatically repeat at various intervals.

•Schedules can be set for random starting, if desired.

•FA168CPS provides up to 16 user schedules; FA148CP provides up to 4 user schedules.

Creating Schedules

Alpha Displays:

1.

(Master Code)

+ [#] + [6] [4]

2.Enter a 2-digit schedule number from:

01-16 (FA168CPS) or 01-04 (FA148CP). Press [∗] to continue.

3.Enter the desired 2-digit event number from the

following list.

00 = clear the scheduled event

01 = turn a programmed output on or off

(see Using Device Commands section for a list of output device numbers used in your system)

02 = set a user access schedule for one or more users

(see Security Codes section for an explanation of access groups)

03 = send a “latch-key” report to a pager if the system is not disarmed by a specified time; message sent is “777-7777.”

04 = automatically arm the system in STAY mode at a specified time

05 = automatically arm the system in AWAY mode at a specified time 06 = automatically disarm the system at a specified time

07 = Display the word “REMINDER” at a specified time (if selected, the keypad beeps every 30 seconds beginning when the word “REMINDER” is first displayed, and the display alternates with the normal keypad display about every 4-5 seconds. To stop the beeps and cancel the display once it starts, simply press any key).

Press [∗] to continue.

4.For event number “01,” enter the output number associated with this schedule.

Otherwise, this prompt is skipped.

Press [∗] to continue to the “Start” prompt shown on the next page.

RELAY NUMBER

00

– 35 –

Page 34 Page 36
Image 35
Page 34 Page 36
Contents FA168CPS / FA168CPSSIA FA148CP / FA148CPSIA About This Manual Table of Contents Security Codes & Authority Levels Using Device Commands Paging FeatureEvent Logging Procedures Panic Keys Macro Key Programming & UsageSystem Basics System OverviewIntroduction Arming, Step-Arming and Disarming Burglary Protection AlarmsMemory of Alarm Zones and PartitionsMessage Center Functions Using the Voice Message Center if Voice Keypad is installedPhone Access General Information About The KeypadsFixed-Word Display Keypad Display Window Functions of the KeypadsStay Entry Delay Entry/Exit DelaysExit Delay Exit Error Conditions Exit AlarmsChecking For Open Zones Using the ∗ KeyTo turn the Voice Status feature on/off # Arming the System Function Key Arming Arming CommandsModes of Arming Press these keys… Keypad Confirms By… Quick ArmingKey First Press Second Press Third Press Step Arming FeatureSingle Button Arming To arm in the Stay mode Using the KeyswitchUsing the Keyswitch To arm in the Away modeUsing the OFF key Disarming and Silencing AlarmsBypassing Protection Zones Using the Bypass KeyQuick Bypass To turn Voice Chime Mode on or off Chime ModeTo turn Chime Mode on To turn Chime Mode offViewing the Current Date and Time Setting the Date and TimeDate and Time To activate a Panic Function Using Panic KeysThis Function Sends this signal With This Sounding… Panic KeysAbout Macro Keys Macro Key Programming & UsageExample of Macro Programming Using a Programmed Macro KeyTo Deactivate Devices Using Device CommandsAbout Device Commands To Activate DevicesAbout Automatic Paging Paging FeatureLatch Key Paging Manual PagingAuthority Level Definitions Security Codes & Authority LevelsAbout Security Codes How to Assign Security Codes and Attributes About Accessing Partitions Accessing Other Partitions FA168CPSMulti-Partition Arming Accessing Other PartitionsUsing the GoTo Command Common Zone Operation Creating Schedules SchedulingAbout Scheduling Group Number Partition Start Smtwtfs Understanding the Type of Event Displayed Event Logging ProceduresAbout Event Logging Viewing the Event LogAbout Testing the System Testing the System To Be Conducted WeeklyTrouble Conditions Check and Battery DisplaysOr Check AlarmFault Rcvr JamLong Rng Trbl Busy-StandbyMaintaining Your System Silencing Low Battery Warning Tones at KeypadThis Section Applies only to Residential Systems Fire Alarm System If InstalledOr Key Pairs Emergency Individual KeysKitchen Dining Emergency Evacuation Quick Guide to Basic System Functions Function Procedure CommentsFixed-Word Display Keypads Summary of Audible/Visual NotificationsSummary of Audible/Visual Notifications Federal Communications Commission FCC Part 15 Statement Regulatory Statements and WarningsRegulatory Statements Function Keys Comments Charts of Your System’s FeaturesCharts of Your System’s Features User User’s Parts Security Auth Access RF Zone Pager No. † Paging Setup List of Output Devices Page Page Page Page OWNER’S Insurance Premium Credit Request Cont Limitations of this System ÊK5309-5V5MŠ

FA168CPS specifications

The Garmin FA168CPS is an advanced navigation device designed primarily for marine use, offering a multitude of features tailored to enhance the user experience on the water. One of its standout characteristics is its high-resolution, sunlight-readable display, which ensures optimal visibility even in bright conditions. The screen is designed to provide clear, detailed maps and graphical data, making navigation easier and more efficient for boaters and sailors alike.

Equipped with GPS and GLONASS technology, the FA168CPS delivers rapid and precise positioning capabilities. This dual-satellite system enhances reliability and coverage, particularly in challenging maritime environments. The device also incorporates a built-in Fishfinder, allowing anglers to locate fish with ease. With advanced sonar capabilities, including CHIRP technology, users can distinguish between different types of fish and underwater structures, significantly increasing their chances of successful fishing trips.

One of the key features of the Garmin FA168CPS is its compatibility with various marine networks. It supports NMEA 2000 for seamless connectivity with other marine devices, allowing users to integrate their navigation system with autopilots, engines, and sensors for streamlined operation. This interoperability enhances situational awareness and greatly improves safety on the water.

Additionally, the FA168CPS comes with preloaded maps and charts, offering comprehensive coverage for coastal and inland waters. The device can also be upgraded with additional Garmin BlueChart g3 maps, providing users with the most up-to-date navigational data, including buoy locations, tidal information, and depth contours.

Among its user-friendly characteristics, the Garmin FA168CPS features intuitive menus and customizable screen layouts, allowing users to personalize their navigation experience. Its robust construction ensures durability in marine environments, making it resistant to water and other harsh conditions. The device is also designed for easy installation, ensuring that boaters can set it up quickly and get right to their adventures.

In summary, the Garmin FA168CPS combines cutting-edge technology with practical features to provide a comprehensive marine navigation solution. From its excellent display and advanced sonar capabilities to its compatibility with marine networks and customizable user interface, this device is an essential tool for anyone looking to navigate the waters with confidence and precision.
Top Page Image Contents