Garmin FA168CPS manual Security Codes & Authority Levels, About Security Codes

Page 30

Security Codes & Authority Levels

About Security Codes

Your installer assigned a master code that is used to perform all system functions. In addition, you can assign different security codes for use by other users (FA168CPS provides 47 additional codes; FA148CP provides 31 additional codes).

Only the System Master and Partition Master can assign security codes to users.

Users are identified by 2-digit user numbers and are pre-assigned to either partition 1 or partition 2 (FA168CPS).

Only the System Master can change user partitions.

In addition to a security code, each user is assigned various system attributes.

Security codes can be used interchangeably within a partition when performing system functions (a system armed with one user's code can be disarmed by another user's code), with the exception of the Guest code and Arm Only code described below.

Security code programming involves these steps:

1.Choose a user number from the set of users assigned to the partition in which the user will be operating, and assign a 4-digit security code.

2.Assign an authority level to that user.

3.Assign other attributes as necessary (see attributes on the next page).

NOTE: The factory settings are designed to meet most normal user situations. Therefore, the only step you usually need to do when adding users is assign a user number (from the partition’s pre-assigned user numbers) and a security code.

Authority Level Definitions

Authority levels define the system functions a particular user can/cannot perform.

Level

Title

Explanation

 

 

 

 

 

N/A

System Master

 

Reserved for user 02; Can perform all system functions and assign codes in

 

(default = 1234)

 

both partitions; can change its own code as follows:

 

 

 

Master code + [8] + 02 + new master code + new master code again

 

 

 

 

0

Standard User

Can only perform security functions in assigned partition.

 

 

Cannot perform system functions reserved for the master user.

1

Arm Only

Can only arm the system. Cannot disarm or do other functions.

 

 

 

2

Guest

Can arm the system in assigned partitions, but cannot disarm the system

 

 

unless the system was armed with this code. This code is typically assigned to

 

 

someone (e.g., babysitter or cleaner) who has a need to arm/disarm the system

 

 

only at certain times. The user of this code should not use the “Quick Arming”

 

 

feature.

 

 

 

3

Duress Code

Intended for use when you are forced to disarm or arm the system under

 

 

threat. When used, the system will act normally, but can silently notify the

 

 

Central Monitoring Station of your situation, if that service has been provided.

 

 

 

4

Partition Master

(FA168CPS) Can do everything a standard user can do, and

 

 

can assign security codes to users in their partition.

– 30 –

Image 30
Contents FA168CPS / FA168CPSSIA FA148CP / FA148CPSIA About This Manual Table of Contents Panic Keys Macro Key Programming & Usage Using Device Commands Paging FeatureEvent Logging Procedures Security Codes & Authority LevelsSystem Overview IntroductionSystem Basics Zones and Partitions AlarmsMemory of Alarm Arming, Step-Arming and Disarming Burglary ProtectionUsing the Voice Message Center if Voice Keypad is installed Phone AccessMessage Center Functions About The Keypads General InformationFixed-Word Display Keypad Functions of the Keypads Display WindowStay Entry/Exit Delays Exit DelayEntry Delay Exit Alarms Exit Error ConditionsUsing the ∗ Key To turn the Voice Status feature on/off #Checking For Open Zones Arming the System Quick Arming Arming CommandsModes of Arming Press these keys… Keypad Confirms By… Function Key ArmingStep Arming Feature Single Button ArmingKey First Press Second Press Third Press To arm in the Away mode Using the KeyswitchUsing the Keyswitch To arm in the Stay modeDisarming and Silencing Alarms Using the OFF keyUsing the Bypass Key Bypassing Protection ZonesQuick Bypass To turn Chime Mode off Chime ModeTo turn Chime Mode on To turn Voice Chime Mode on or offSetting the Date and Time Date and TimeViewing the Current Date and Time Panic Keys Using Panic KeysThis Function Sends this signal With This Sounding… To activate a Panic FunctionMacro Key Programming & Usage About Macro KeysUsing a Programmed Macro Key Example of Macro ProgrammingTo Activate Devices Using Device CommandsAbout Device Commands To Deactivate DevicesPaging Feature About Automatic PagingManual Paging Latch Key PagingSecurity Codes & Authority Levels About Security CodesAuthority Level Definitions How to Assign Security Codes and Attributes Accessing Other Partitions FA168CPS About Accessing PartitionsAccessing Other Partitions Using the GoTo CommandMulti-Partition Arming Common Zone Operation Scheduling About SchedulingCreating Schedules Group Number Partition Start Smtwtfs Viewing the Event Log Event Logging ProceduresAbout Event Logging Understanding the Type of Event DisplayedTesting the System To Be Conducted Weekly About Testing the SystemCheck and Battery Displays Trouble ConditionsRcvr Jam AlarmFault Or CheckBusy-Standby Long Rng TrblSilencing Low Battery Warning Tones at Keypad Maintaining Your SystemFire Alarm System If Installed This Section Applies only to Residential SystemsEmergency Individual Keys Or Key PairsKitchen Dining Emergency Evacuation Function Procedure Comments Quick Guide to Basic System FunctionsSummary of Audible/Visual Notifications Fixed-Word Display KeypadsSummary of Audible/Visual Notifications Regulatory Statements and Warnings Federal Communications Commission FCC Part 15 StatementRegulatory Statements Charts of Your System’s Features Function Keys CommentsCharts of Your System’s Features User User’s Parts Security Auth Access RF Zone Pager No. † Paging Setup List of Output Devices Page Page Page Page OWNER’S Insurance Premium Credit Request Cont Limitations of this System ÊK5309-5V5MŠ

FA168CPS specifications

The Garmin FA168CPS is an advanced navigation device designed primarily for marine use, offering a multitude of features tailored to enhance the user experience on the water. One of its standout characteristics is its high-resolution, sunlight-readable display, which ensures optimal visibility even in bright conditions. The screen is designed to provide clear, detailed maps and graphical data, making navigation easier and more efficient for boaters and sailors alike.

Equipped with GPS and GLONASS technology, the FA168CPS delivers rapid and precise positioning capabilities. This dual-satellite system enhances reliability and coverage, particularly in challenging maritime environments. The device also incorporates a built-in Fishfinder, allowing anglers to locate fish with ease. With advanced sonar capabilities, including CHIRP technology, users can distinguish between different types of fish and underwater structures, significantly increasing their chances of successful fishing trips.

One of the key features of the Garmin FA168CPS is its compatibility with various marine networks. It supports NMEA 2000 for seamless connectivity with other marine devices, allowing users to integrate their navigation system with autopilots, engines, and sensors for streamlined operation. This interoperability enhances situational awareness and greatly improves safety on the water.

Additionally, the FA168CPS comes with preloaded maps and charts, offering comprehensive coverage for coastal and inland waters. The device can also be upgraded with additional Garmin BlueChart g3 maps, providing users with the most up-to-date navigational data, including buoy locations, tidal information, and depth contours.

Among its user-friendly characteristics, the Garmin FA168CPS features intuitive menus and customizable screen layouts, allowing users to personalize their navigation experience. Its robust construction ensures durability in marine environments, making it resistant to water and other harsh conditions. The device is also designed for easy installation, ensuring that boaters can set it up quickly and get right to their adventures.

In summary, the Garmin FA168CPS combines cutting-edge technology with practical features to provide a comprehensive marine navigation solution. From its excellent display and advanced sonar capabilities to its compatibility with marine networks and customizable user interface, this device is an essential tool for anyone looking to navigate the waters with confidence and precision.