Garmin FA168CPS manual Group Number Partition Start Smtwtfs

Page 36

Scheduling (continued)

5.For event number “02,” enter the access group

number. Otherwise, this prompt is skipped. Press [∗] to continue to the “Start” prompt below.

6.For event numbers “03-07,” enter the partition number to be armed or disarmed.

0 = arm all; 1 = partition 1; 2 = partition 2; 3 = arm common

Otherwise, this prompt is skipped.

Press [∗] to continue to the “Start” prompt.

7.Enter the event’s start time and days of week. Hour = 00-12; minute = 00-59

AM = 0; PM = 1

Days = Position the cursor under the desired days using the [∗] key to move forward, then press “1” to

select the day. Press [∗] to continue.

8.If applicable, enter the event’s stop time and days of week (applies only to event numbers 01, 02, and 03).

Refer to step 7 for available entries. Press [∗] to continue.

9.Enter the desired repeat option.

0 = no repeat

1 = repeat schedule weekly

2 = repeat schedule biweekly (every other week)

3 = repeat schedule every third week

4 = repeat schedule every fourth week

e.g., To make a schedule that happens everyday you would select all days with a repeat count of 1. To make a schedule that runs for one week then stops,

select everyday with a repeat count of 0. Press [∗] to continue.

10.For event number 01 (output on/off), select the desired randomize option. 0 = no; 1 = yes

If selected, the schedule times will vary within 60 minutes of the “hour” time. For example, if a schedule is set to start at 6:15pm, it will do so the first time 6:15pm arrives, but on subsequent days it

will start anytime between 6:00 and 6:59 p.m. Press [∗] to continue.

GROUP NUMBER

X

PARTITION

X

START SMTWTFS

HH:MMAM 1000000

STOP SMTWTFS HH:MMAM 1000000

REPEAT OPTION

0-4X

RANDOMIZE

0=NO 1=YES X

– 36 –

Page 35 Page 37
Image 36
Page 35 Page 37
Contents FA168CPS / FA168CPSSIA FA148CP / FA148CPSIA About This Manual Table of Contents Using Device Commands Paging Feature Event Logging ProceduresPanic Keys Macro Key Programming & Usage Security Codes & Authority LevelsSystem Overview IntroductionSystem Basics Alarms Memory of AlarmZones and Partitions Arming, Step-Arming and Disarming Burglary ProtectionUsing the Voice Message Center if Voice Keypad is installed Phone AccessMessage Center Functions About The Keypads General InformationFixed-Word Display Keypad Functions of the Keypads Display WindowStay Entry/Exit Delays Exit DelayEntry Delay Exit Alarms Exit Error ConditionsUsing the ∗ Key To turn the Voice Status feature on/off #Checking For Open Zones Arming the System Arming Commands Modes of Arming Press these keys… Keypad Confirms By…Quick Arming Function Key ArmingStep Arming Feature Single Button ArmingKey First Press Second Press Third Press Using the Keyswitch Using the KeyswitchTo arm in the Away mode To arm in the Stay modeDisarming and Silencing Alarms Using the OFF keyUsing the Bypass Key Bypassing Protection ZonesQuick Bypass Chime Mode To turn Chime Mode onTo turn Chime Mode off To turn Voice Chime Mode on or offSetting the Date and Time Date and TimeViewing the Current Date and Time Using Panic Keys This Function Sends this signal With This Sounding…Panic Keys To activate a Panic FunctionMacro Key Programming & Usage About Macro KeysUsing a Programmed Macro Key Example of Macro ProgrammingUsing Device Commands About Device CommandsTo Activate Devices To Deactivate DevicesPaging Feature About Automatic PagingManual Paging Latch Key PagingSecurity Codes & Authority Levels About Security CodesAuthority Level Definitions How to Assign Security Codes and Attributes Accessing Other Partitions FA168CPS About Accessing PartitionsAccessing Other Partitions Using the GoTo CommandMulti-Partition Arming Common Zone Operation Scheduling About SchedulingCreating Schedules Group Number Partition Start Smtwtfs Event Logging Procedures About Event LoggingViewing the Event Log Understanding the Type of Event DisplayedTesting the System To Be Conducted Weekly About Testing the SystemCheck and Battery Displays Trouble ConditionsAlarm FaultRcvr Jam Or CheckBusy-Standby Long Rng TrblSilencing Low Battery Warning Tones at Keypad Maintaining Your SystemFire Alarm System If Installed This Section Applies only to Residential SystemsEmergency Individual Keys Or Key PairsKitchen Dining Emergency Evacuation Function Procedure Comments Quick Guide to Basic System FunctionsSummary of Audible/Visual Notifications Fixed-Word Display KeypadsSummary of Audible/Visual Notifications Regulatory Statements and Warnings Federal Communications Commission FCC Part 15 StatementRegulatory Statements Charts of Your System’s Features Function Keys CommentsCharts of Your System’s Features User User’s Parts Security Auth Access RF Zone Pager No. † Paging Setup List of Output Devices Page Page Page Page OWNER’S Insurance Premium Credit Request Cont Limitations of this System ÊK5309-5V5MŠ

FA168CPS specifications

The Garmin FA168CPS is an advanced navigation device designed primarily for marine use, offering a multitude of features tailored to enhance the user experience on the water. One of its standout characteristics is its high-resolution, sunlight-readable display, which ensures optimal visibility even in bright conditions. The screen is designed to provide clear, detailed maps and graphical data, making navigation easier and more efficient for boaters and sailors alike.

Equipped with GPS and GLONASS technology, the FA168CPS delivers rapid and precise positioning capabilities. This dual-satellite system enhances reliability and coverage, particularly in challenging maritime environments. The device also incorporates a built-in Fishfinder, allowing anglers to locate fish with ease. With advanced sonar capabilities, including CHIRP technology, users can distinguish between different types of fish and underwater structures, significantly increasing their chances of successful fishing trips.

One of the key features of the Garmin FA168CPS is its compatibility with various marine networks. It supports NMEA 2000 for seamless connectivity with other marine devices, allowing users to integrate their navigation system with autopilots, engines, and sensors for streamlined operation. This interoperability enhances situational awareness and greatly improves safety on the water.

Additionally, the FA168CPS comes with preloaded maps and charts, offering comprehensive coverage for coastal and inland waters. The device can also be upgraded with additional Garmin BlueChart g3 maps, providing users with the most up-to-date navigational data, including buoy locations, tidal information, and depth contours.

Among its user-friendly characteristics, the Garmin FA168CPS features intuitive menus and customizable screen layouts, allowing users to personalize their navigation experience. Its robust construction ensures durability in marine environments, making it resistant to water and other harsh conditions. The device is also designed for easy installation, ensuring that boaters can set it up quickly and get right to their adventures.

In summary, the Garmin FA168CPS combines cutting-edge technology with practical features to provide a comprehensive marine navigation solution. From its excellent display and advanced sonar capabilities to its compatibility with marine networks and customizable user interface, this device is an essential tool for anyone looking to navigate the waters with confidence and precision.
Top Page Image Contents