Garmin FA168CPS manual Single Button Arming, Step Arming Feature

Page 17

Arming the System

Single Button Arming

The “A”, “B”, “C”, and/or “D” keys on your keypad may have been programmed for single-button arming. Note that while it is not necessary to use a security code for arming (by using the Quick Arm method described previously), a security code must always be used when manually disarming the system.

If Single-Button Arming is programmed:

•A function key has been assigned to a specific type of arming: STAY mode, Night-STAY mode, AWAY mode, or STEP-ARMING (see Step-Arming paragraph).

•You DO NOT need to enter your security code before pressing the function key (but you always need your security code to DISARM the system).

Before arming, close all perimeter doors and windows.

1.Press and hold the assigned function key for 2 seconds (no code is required). Function keys are shown below.

A

1

OFF

2

AWAY

3

STAY

 

B

4

MAX

5

TEST

6

BYPASS

-00-001-V0

C

7

INSTANT

8

CODE

9

CHECK

D

* READY

0

 

#

 

keypad keys

2.The keypad begins beeping and displays the armed

message. The red ARMED indicator also lights.

Alpha Display:

DISARMED

READY TO ARM

Fixed-Word Display: READY

Alpha Display:

ARMED***AWAY***

YOU MAY EXIT NOW

Fixed-Word Display: AWAY

Step Arming Feature

Single-Button “Step” arming may have been programmed into one of the lettered keys (A, B, C, or D). Check with your installer to see if this has been done in your system.

If Step-Arming is programmed:

•The assigned key provides a choice of three levels of security.

•The selected key can be pressed once, twice, or three times, increasing the level of security with each press, as follows

Key

First Press

Second Press

Third Press

Ø

Ø

Ø

Ø

A, B, C, D

Armed-STAY

Armed Night-STAY

Armed-AWAY

 

 

(if programmed)

 

– 17 –

Page 16 Page 18
Image 17
Page 16 Page 18
Contents FA168CPS / FA168CPSSIA FA148CP / FA148CPSIA About This Manual Table of Contents Event Logging Procedures Using Device Commands Paging FeaturePanic Keys Macro Key Programming & Usage Security Codes & Authority LevelsSystem Basics System OverviewIntroduction Memory of Alarm AlarmsZones and Partitions Arming, Step-Arming and Disarming Burglary ProtectionMessage Center Functions Using the Voice Message Center if Voice Keypad is installedPhone Access General Information About The KeypadsFixed-Word Display Keypad Display Window Functions of the KeypadsStay Entry Delay Entry/Exit DelaysExit Delay Exit Error Conditions Exit AlarmsChecking For Open Zones Using the ∗ KeyTo turn the Voice Status feature on/off # Arming the System Modes of Arming Press these keys… Keypad Confirms By… Arming CommandsQuick Arming Function Key ArmingKey First Press Second Press Third Press Step Arming FeatureSingle Button Arming Using the Keyswitch Using the KeyswitchTo arm in the Away mode To arm in the Stay modeUsing the OFF key Disarming and Silencing AlarmsBypassing Protection Zones Using the Bypass KeyQuick Bypass To turn Chime Mode on Chime ModeTo turn Chime Mode off To turn Voice Chime Mode on or offViewing the Current Date and Time Setting the Date and TimeDate and Time This Function Sends this signal With This Sounding… Using Panic KeysPanic Keys To activate a Panic FunctionAbout Macro Keys Macro Key Programming & UsageExample of Macro Programming Using a Programmed Macro KeyAbout Device Commands Using Device CommandsTo Activate Devices To Deactivate DevicesAbout Automatic Paging Paging FeatureLatch Key Paging Manual PagingAuthority Level Definitions Security Codes & Authority LevelsAbout Security Codes How to Assign Security Codes and Attributes About Accessing Partitions Accessing Other Partitions FA168CPSMulti-Partition Arming Accessing Other PartitionsUsing the GoTo Command Common Zone Operation Creating Schedules SchedulingAbout Scheduling Group Number Partition Start Smtwtfs About Event Logging Event Logging ProceduresViewing the Event Log Understanding the Type of Event DisplayedAbout Testing the System Testing the System To Be Conducted WeeklyTrouble Conditions Check and Battery DisplaysFault AlarmRcvr Jam Or CheckLong Rng Trbl Busy-StandbyMaintaining Your System Silencing Low Battery Warning Tones at KeypadThis Section Applies only to Residential Systems Fire Alarm System If InstalledOr Key Pairs Emergency Individual KeysKitchen Dining Emergency Evacuation Quick Guide to Basic System Functions Function Procedure CommentsFixed-Word Display Keypads Summary of Audible/Visual NotificationsSummary of Audible/Visual Notifications Federal Communications Commission FCC Part 15 Statement Regulatory Statements and WarningsRegulatory Statements Function Keys Comments Charts of Your System’s FeaturesCharts of Your System’s Features User User’s Parts Security Auth Access RF Zone Pager No. † Paging Setup List of Output Devices Page Page Page Page OWNER’S Insurance Premium Credit Request Cont Limitations of this System ÊK5309-5V5MŠ

FA168CPS specifications

The Garmin FA168CPS is an advanced navigation device designed primarily for marine use, offering a multitude of features tailored to enhance the user experience on the water. One of its standout characteristics is its high-resolution, sunlight-readable display, which ensures optimal visibility even in bright conditions. The screen is designed to provide clear, detailed maps and graphical data, making navigation easier and more efficient for boaters and sailors alike.

Equipped with GPS and GLONASS technology, the FA168CPS delivers rapid and precise positioning capabilities. This dual-satellite system enhances reliability and coverage, particularly in challenging maritime environments. The device also incorporates a built-in Fishfinder, allowing anglers to locate fish with ease. With advanced sonar capabilities, including CHIRP technology, users can distinguish between different types of fish and underwater structures, significantly increasing their chances of successful fishing trips.

One of the key features of the Garmin FA168CPS is its compatibility with various marine networks. It supports NMEA 2000 for seamless connectivity with other marine devices, allowing users to integrate their navigation system with autopilots, engines, and sensors for streamlined operation. This interoperability enhances situational awareness and greatly improves safety on the water.

Additionally, the FA168CPS comes with preloaded maps and charts, offering comprehensive coverage for coastal and inland waters. The device can also be upgraded with additional Garmin BlueChart g3 maps, providing users with the most up-to-date navigational data, including buoy locations, tidal information, and depth contours.

Among its user-friendly characteristics, the Garmin FA168CPS features intuitive menus and customizable screen layouts, allowing users to personalize their navigation experience. Its robust construction ensures durability in marine environments, making it resistant to water and other harsh conditions. The device is also designed for easy installation, ensuring that boaters can set it up quickly and get right to their adventures.

In summary, the Garmin FA168CPS combines cutting-edge technology with practical features to provide a comprehensive marine navigation solution. From its excellent display and advanced sonar capabilities to its compatibility with marine networks and customizable user interface, this device is an essential tool for anyone looking to navigate the waters with confidence and precision.
Top Page Image Contents