Garmin FA168CPS manual Disarming and Silencing Alarms, Using the OFF key

Page 19

Disarming and Silencing Alarms

Using the [OFF] key

The OFF key is used to disarm the system, silence alarm and trouble sounds, and clear alarm memories.

IMPORTANT: If you return and the main burglary sounder is on, DO NOT ENTER, but CONTACT THE POLICE from a nearby safe location.

If you return after an alarm has occurred and the main sounder has shut itself off, the keypad will

beep rapidly upon your entering, indicating that an alarm has occurred during your absence.

LEAVE AT ONCE, and CONTACT THE POLICE from a nearby safe location.

1. + 1

(Security Code) OFF

The “READY” indicator light will be lit if all zones are secure, and the keypad will emit a single tone to confirm that the system is disarmed.

NOTE: If entry delay has started (you’ve opened the entry door), you do not need to press the OFF key; simply enter your security code. The system will disarm in about 15 seconds after the last digit of the code is entered.

Alpha Display:

DISARMED

READY TO ARM

Fixed-Word Display: READY

2.To Silence a Burglary Alarm and Clear a Memory of Alarm

Enter your security code. This disarms the system and silences the alarm (or warning tones of a Memory of Alarm).

Note the zone in alarm on the keypad display, and make that zone intact (close door, window, etc.). Now enter the security code plus OFF to clear the keypad’s Memory of Alarm display.

3.To Silence a Fire Alarm or Carbon Monoxide Alarm and Clear Memory of Alarm

Simply press the OFF key to silence the alarm. Then enter the security code plus OFF sequence to clear the keypad's Memory of Alarm display. See the Fire Alarm System section.

– 19 –

Page 18 Page 20
Image 19
Page 18 Page 20
Contents FA168CPS / FA168CPSSIA FA148CP / FA148CPSIA About This Manual Table of Contents Security Codes & Authority Levels Using Device Commands Paging FeatureEvent Logging Procedures Panic Keys Macro Key Programming & UsageIntroduction System OverviewSystem Basics Arming, Step-Arming and Disarming Burglary Protection AlarmsMemory of Alarm Zones and PartitionsPhone Access Using the Voice Message Center if Voice Keypad is installedMessage Center Functions General Information About The KeypadsFixed-Word Display Keypad Display Window Functions of the KeypadsStay Exit Delay Entry/Exit DelaysEntry Delay Exit Error Conditions Exit AlarmsTo turn the Voice Status feature on/off # Using the ∗ KeyChecking For Open Zones Arming the System Function Key Arming Arming CommandsModes of Arming Press these keys… Keypad Confirms By… Quick ArmingSingle Button Arming Step Arming FeatureKey First Press Second Press Third Press To arm in the Stay mode Using the KeyswitchUsing the Keyswitch To arm in the Away modeUsing the OFF key Disarming and Silencing AlarmsBypassing Protection Zones Using the Bypass KeyQuick Bypass To turn Voice Chime Mode on or off Chime ModeTo turn Chime Mode on To turn Chime Mode offDate and Time Setting the Date and TimeViewing the Current Date and Time To activate a Panic Function Using Panic KeysThis Function Sends this signal With This Sounding… Panic KeysAbout Macro Keys Macro Key Programming & UsageExample of Macro Programming Using a Programmed Macro KeyTo Deactivate Devices Using Device CommandsAbout Device Commands To Activate DevicesAbout Automatic Paging Paging FeatureLatch Key Paging Manual PagingAbout Security Codes Security Codes & Authority LevelsAuthority Level Definitions How to Assign Security Codes and Attributes About Accessing Partitions Accessing Other Partitions FA168CPSUsing the GoTo Command Accessing Other PartitionsMulti-Partition Arming Common Zone Operation About Scheduling SchedulingCreating Schedules Group Number Partition Start Smtwtfs Understanding the Type of Event Displayed Event Logging ProceduresAbout Event Logging Viewing the Event LogAbout Testing the System Testing the System To Be Conducted WeeklyTrouble Conditions Check and Battery DisplaysOr Check AlarmFault Rcvr JamLong Rng Trbl Busy-StandbyMaintaining Your System Silencing Low Battery Warning Tones at KeypadThis Section Applies only to Residential Systems Fire Alarm System If InstalledOr Key Pairs Emergency Individual KeysKitchen Dining Emergency Evacuation Quick Guide to Basic System Functions Function Procedure CommentsFixed-Word Display Keypads Summary of Audible/Visual NotificationsSummary of Audible/Visual Notifications Federal Communications Commission FCC Part 15 Statement Regulatory Statements and WarningsRegulatory Statements Function Keys Comments Charts of Your System’s FeaturesCharts of Your System’s Features User User’s Parts Security Auth Access RF Zone Pager No. † Paging Setup List of Output Devices Page Page Page Page OWNER’S Insurance Premium Credit Request Cont Limitations of this System ÊK5309-5V5MŠ

FA168CPS specifications

The Garmin FA168CPS is an advanced navigation device designed primarily for marine use, offering a multitude of features tailored to enhance the user experience on the water. One of its standout characteristics is its high-resolution, sunlight-readable display, which ensures optimal visibility even in bright conditions. The screen is designed to provide clear, detailed maps and graphical data, making navigation easier and more efficient for boaters and sailors alike.

Equipped with GPS and GLONASS technology, the FA168CPS delivers rapid and precise positioning capabilities. This dual-satellite system enhances reliability and coverage, particularly in challenging maritime environments. The device also incorporates a built-in Fishfinder, allowing anglers to locate fish with ease. With advanced sonar capabilities, including CHIRP technology, users can distinguish between different types of fish and underwater structures, significantly increasing their chances of successful fishing trips.

One of the key features of the Garmin FA168CPS is its compatibility with various marine networks. It supports NMEA 2000 for seamless connectivity with other marine devices, allowing users to integrate their navigation system with autopilots, engines, and sensors for streamlined operation. This interoperability enhances situational awareness and greatly improves safety on the water.

Additionally, the FA168CPS comes with preloaded maps and charts, offering comprehensive coverage for coastal and inland waters. The device can also be upgraded with additional Garmin BlueChart g3 maps, providing users with the most up-to-date navigational data, including buoy locations, tidal information, and depth contours.

Among its user-friendly characteristics, the Garmin FA168CPS features intuitive menus and customizable screen layouts, allowing users to personalize their navigation experience. Its robust construction ensures durability in marine environments, making it resistant to water and other harsh conditions. The device is also designed for easy installation, ensuring that boaters can set it up quickly and get right to their adventures.

In summary, the Garmin FA168CPS combines cutting-edge technology with practical features to provide a comprehensive marine navigation solution. From its excellent display and advanced sonar capabilities to its compatibility with marine networks and customizable user interface, this device is an essential tool for anyone looking to navigate the waters with confidence and precision.
Top Page Image Contents