OPERATION
Continued
STORING,
TRANSPORTING, OR SHIPPING
PREVENTATIVE MAINTENANCE SCHEDULE
8
Control
Reset Button
(Fan Guard
Removed)
Figure 8 - Flame-Out Control Reset Button, 44 kW (150,000 Btu/Hr) Model
To Stop Heater
1. Unplug power cord from outlet.
To Restart Heater
1.Wait 2 minutes after stopping heater.
2.Repeat steps under To Start Heater, page 7.
Note: If shipping, transport companies require fuel tanks to be empty.
1.Drain fuel tank.
Note: Some models have drain plug on underside of fuel tank. If so, remove drain plug to drain all fuel. If heater does not have drain plug, drain fuel through fuel cap opening. Be sure all fuel is removed.
2.Replace drain plug if provided.
3.If any debris is noted in old fuel, add 1 or 2 quarts of clean kerosene to tank, stir, and drain again. This will prevent excess debris from clogging filters during future use.
4.Replace fuel cap or drain plug. Properly dispose of old and dirty fuel. Check with local automotive service stations that recycle oil.
5.If storing, store heater in dry place. Make sure storage place is free of dust and corrosive fumes.
IMPORTANT: Do not store kerosene over summer months for use during next heating season. Using old fuel could damage heater.
WARNING
WARNING ICONG 001
Never service heater while it is plugged in, operating, or hot. Severe burns and electrical shock can occur.
Item | How Often | How To |
Fuel tank | Flush every | See Storing, Transporting, or |
| of operation or as needed. | Shipping, above. |
Air output and | Replace every 500 hours of | See Air Output, Air Intake, |
lint filters | operation or once a year. | and Lint Filters, page 14. |
Air intake | Wash and dry with soap and | See Air Output, Air Intake, |
filter | water every 500 hours of | and Lint Filters, page 14. |
| operation or as needed. |
|
Fuel filter | Clean twice a heating season | See Fuel Filter, pages 10 |
| or as needed. | and 11. |
|
| Continued |
099623