Grizzly G0641 owner manual Maintenance, Schedule, Cleaning

SECTION 6: MAINTENANCE

Always disconnect power to the machine before performing maintenance. Failure to do this may result in serious person- al injury.

Schedule

For optimum performance from your machine, follow this maintenance schedule and refer to any specific instructions given in this section.

Daily:

•Check/tighten/replace loose or worn mount- ing bolts.

•Check/sharpen/replace damaged or dull saw blades.

•Check/repair/replace worn or damaged wires or connectors.

•Check/re-fill pneumatic and lower pivot arm oil reservoirs.

•Clean/protect saw blades and table.

•Check/repair any other unsafe condition.

-26-

Weekly:

•Drain water from the air filter collection cup.

•Clean/vacuum inside cabinet stand, and under safety hood.

•Lubricate blade arbor housings and tie-rod pivot points.

Monthly:

•Check/re-tension/replace V-belt tension, damage, or wear.

Cleaning

Vacuum excess wood chips and sawdust, and wipe off the remaining dust with a dry cloth. If any resin has built up, use a resin dissolving cleaner like OxiSolv® spray to remove it (see Section 5: Accessories on Page 23 for more details).

Protect the unpainted cast iron surfaces on the table by wiping the it clean after every use—this ensures moisture from wood dust does not remain on bare metal surfaces.

Keep tables rust-free with regular applications of products like G96® Gun Treatment, SLIPIT®, or Boeshield® T-9 (see Page 24 for more details).

G0641 Double Miter Saw