Grizzly G0641 owner manual Replacing Blades, To replace the saw blades

replacing blades

Replacing Blades

The teeth of saw blades are sharp and can easily cut fingers and hands. Always wear heavy leath- er gloves when handling saw blades.

The Model G0641 comes with two high-quality 12", 120-tooth blades. For best cutting results, select replacement blades that are designed for miter cuts and are of high quality.

To replace the saw blades:

1.DISCONNECT SAW FROM POWER!

2.Raise the front guard up, and remove the inner blade guard to access the blade arm assemblies and motors (see Figure 20).

Figure 20. Guards removed to access blade arm

assemblies and motors.

-22-

3.Use a 14mm wrench on the inner arbor nut (see Figure 35) and a 19mm wrench on the arbor bolt to remove the arbor bolt, arbor flange, and saw blade.

Inner Arbor Nut

Arbor Bolt

& Flange

Figure 21. Blade arbor bolt, flange, and nut (left

side shown).

Note: The left saw blade has a left-hand arbor bolt—to remove it, turn it clockwise. The right saw blade has a normally threaded arbor bolt and is removed by turning it coun- terclockwise.

4.Install the new blade on the arbor so that the teeth are pointing forward.

5.Secure the blade with the arbor flange and bolt.

Note: The arbor flange MUST be installed to ensure the blade is safely secured.

6.Reinstall the inner blade guard and secure the front guard in the lower position.

G0641 Double Miter Saw