Fuel Filters
A. Tank Fuel Filter
1.Disconnect fuel lines from pump and pump fuel filter assembly with 7/16" wrench (see Figure 15).
2.Carefully pry fuel filter loose from fuel tank with flat end of screwdriver.
3.Inspect fuel filter for water or dirt.
4.Rinse fuel filter and fuel lines with clean kerosene.
5.Replace fuel filter into fuel tank.
6.Connect fuel lines to pump and pump fuel filter assembly.
B. Pump Fuel Filter
1.Unscrew canister bottom from canister top with Channellock pliers.
2.Remove fuel filter and gasket from canister bottom (see Figure 16).
3.Inspect canister bottom and fuel filter for water or dirt.
4.Rinse canister bottom in clean kerosene.
5.Wipe inside of canister bottom dry with clean cloth.
6.Rinse fuel filter in clean kerosene.
7.Put clean fuel filter and gasket back in canister bottom.
8.Screw canister bottom into canister top.
Pump Fuel
Filter
Assembly
Pump
Fuel Lines
Fuel Filter
Figure 15 - Removing Tank Fuel Filter
Canister Top
Gasket
Fuel Filter
Canister Bottom
Figure 16 - Fuel Pump Filter and Canister
17
103807