Desa 000) 26, 000) 20 owner manual Safety Information

Page 3

SAFETY INFORMATION

Continued

•Use only kerosene or No. 1 fuel oil to avoid risk of fire or explosion. Never use gasoline, naphtha, paint thinners, alcohol, or other highly flammable fuels.

•Fueling

a)Personnel involved with fueling shall be qualified and thoroughly famil- iar with the manufacturer’s instructions and applicable regional regulations regarding the safe fueling of heating units.

b)Only the type of fuel specified on the heater’s data plate shall be used.

c)All flame, including the pilot light, if any, shall be extinguished and the heater allowed to cool, prior to fueling.

d)During fueling, all fuel lines and fuel-line connections shall be inspected for leaks. Any leaks shall be repaired prior to returning the heater to service.

e)At no time shall more than one day’s supply of heater fuel be stored inside a building in the vicinity of the heater. Bulk fuel storage shall be outside the structure.

f)All fuel storage shall be located a minimum of 25 feet from heaters,

torches, welding equipment, and similar sources of ignition (exception: the fuel reservoir integral with the heater unit).

g)Whenever possible, fuel storage shall be confined to areas where floor penetrations do not permit fuel to drip onto or be ignited by a fire at lower elevation.

h)Fuel storage shall be in accordance with the regional authority having jurisdiction.

•Never use heater where gasoline, paint thinner, or other highly flammable vapors are present.

•Follow all local ordinances and codes when using heater.

•Heaters used in the vicinity of tarpaulins, canvas, or similar enclosure materials shall be located a safe distance from such materials. The recom- mended minimum safe distance is 10 feet. It is further recommended that these enclosure materials be of a fire retardant nature. These enclosure materials shall be securely fastened to prevent them from igniting or from upsetting the heater due to wind action.

•Use only in well-vented areas. Provide at least a three-square foot (2800 square cm) opening of fresh, outside air for each 29,3 kW (100,000 Btu/Hr) of rating.

•Use only in places free of flammable vapors or high dust content.

•Use only with the electrical voltage and frequency specified on model plate.

•Use only a grounded (earthed) extension cord.

•Minimum heater clearances from combustibles:

Outlet: 250 cm (8 Ft.)

Sides, Top, and Rear: 125 cm (8 Ft.)

•Locate heater on a stable and level surface while hot or running or a fire may occur.

•When moving or storing heater, keep heater in a level position or fuel spillage may occur.

•Keep children and animals away from heater.

•Unplug heater when not in use.

•When used with thermostat, heater may start anytime.

•Never use heater in living or sleeping areas.

•Never block air inlet (rear) or air outlet (front) of heater.

•Never move, handle, refuel, or service a hot, operating, or plugged-in heater.

•Never attach duct work to front or rear of heater. Using duct work could reduce the necessary air flow of heater. Heater would produce excessive carbon monoxide.

3

102748

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Portable Forced AIR Heaters Contents Safety Information Safety Information Product Identification Tools Needed Unpacking AssemblyOperation TheoryTo Start Heater Ventilation OperationTo Restart Heater Preventative Maintenance ScheduleOperation Storing To Stop HeaterPossible Cause TROUBLE- ShootingService Procedures Upper Shell RemovalFuel Filter Spark Plug Removal, 8,8 kW 30,000 Btu/Hr Model Spark PlugSpark Plug Gap, 20,5/26,4/44 kW 70/90/150,000 Btu/Hr Models Air Output, Air Intake, and Lint Filters Pump Pressure AdjustmentRemoving Air and Fuel Line Hoses, 8,8 kW 30,000 Btu/Hr Model NozzleRemove upper shell see Rotor Location, 8,8/20,5 kW 30/70,000 Btu/Hr Models Pump RotorFan SpecificationsAccessories Wiring DiagramsNumber Description QTY Illustrated Parts Breakdown and Parts ListKW 30,000 Btu/Hr Parts BreakdownKEY Part Number Description QTY Parts List20,5 kW 70,000 Btu/Hr Burner Head AssemblyFHPF3-2C 26,4 kW 90,000 Btu/Hr 098511-66 Upper Shell M16841-59 44 kW 150,000 Btu/Hr Illustrated Parts BreakdownFHPF3-6C Certificate of General Equipment Limited 90 DAY Warranty Warranty and Repair ServiceCalentadores Portatiles DE Aire Forzado Seccion Pagina ContenidoAdvertencias Informacion DE SeguridadInformacion DE Seguridad Identificacion DEL Producto Desembalaje Armado Combustibles Teoria DEFuncionamiento VentilacionPara apagar el calentador Para volver a encender el calentadorProcedimiento Advertencia ¡Alto voltaje Localizacion DE AveriasFiltro de combustible Remoció n del casco superiorLínea de combustible superior Bujía Quite el casco superior vea la Ajuste de la presió n de la bomba Filtros de salida de aire, de admisió n de aire y de pelusaSuperior BoquillaTible del quemador Quite la placa de la bomba Rotor de la bombaFigura 30 Corte transversal del ventilador VentiladorEspecificaciones Rojo Amarillo Diagramas DE AlambradoJuego DE Ruedas Y ASA DE Servicio Severo HA1202 AccesoriosClave NO. Pieza Descripcion Despiece Ilustrado Y Lista DE PiezasKW 30,000 Btu/hr Despiece IlustradoLista DE Piezas 20,5 kW 70,000 Btu/hr Lista DE Piezas 26,4 kW 90,000 Btu/hr 098511-66 Casco superior 44 kW 150,000 Btu/hr Pieza Descripcion CTD Servicio DE Garantia Garantia Y Reparaciones

000) 26, 000) 20 specifications

Desa 000) 26,000) 20 is an innovative concept that merges state-of-the-art technologies with sustainable living to create an ideal environment for both technology enthusiasts and eco-conscious individuals. At its core, Desa 000) 26,000) 20 embodies a novel approach to urban living, integrating smart infrastructure with green initiatives to enhance the quality of life for its residents.

One of the main features of Desa 000) 26,000) 20 is its advanced smart home technology. Every unit within the community is equipped with smart appliances and IoT devices that enable seamless connectivity and control over household systems. Residents can manage lighting, security, and climate control remotely through mobile applications, significantly improving energy efficiency and convenience. This integration of technology not only allows for a more comfortable living environment but also reduces energy consumption, aligning with the principles of sustainability.

Another characteristic that sets Desa 000) 26,000) 20 apart is its commitment to green spaces. The community is designed with a focus on preserving nature, featuring abundant parks, community gardens, and walking trails that encourage a connection with the outdoors. This emphasis on green areas promotes mental well-being and provides a scenic backdrop for recreational activities, making it an inviting place for families and individuals alike.

In terms of transportation, Desa 000) 26,000) 20 promotes eco-friendly mobility solutions. The community is equipped with electric vehicle charging stations, and a network of bike paths encourages residents to use bicycles for daily commutes. Additionally, public transport options are conveniently accessible, offering a comprehensive mobility solution that reduces reliance on fossil fuels.

Sustainability extends to water management in Desa 000) 26,000) 20, featuring rainwater harvesting systems and greywater recycling initiatives. Such technologies provide residents with a reliable source of water while minimizing waste and environmental impact.

In conclusion, Desa 000) 26,000) 20 represents a forward-thinking community that harmoniously blends technology with sustainability. Its smart home features, commitment to green spaces, emphasis on eco-friendly transportation, and advanced water management systems create a unique living experience. This innovative approach not only enhances the quality of life for its residents but also serves as a model for future urban developments, addressing the pressing need for sustainable living solutions in today's society.
Top Page Image Contents