Fan Only Mode
NOTE: Fan Only mode does not require that the exhaust hose be attached.
Fan Only mode is used to circulate the air in your room. No temperature setting is needed.
To operate the unit in Fan Only mode:
1)Make sure the power cord is plugged into a power outlet.
2)Press the Power button.
3)Press the Mode button until the LED indicator next to “Fan Only” lights up.
4)Press the Speed button to select the fan speed. You can choose between High, Medium and Low. The LED indicator next to the speed will light up.
Speed
Timer
The Speed button is used to change the fan speed while in Cooling and Fan Only modes.
Press the Speed button to select the fan speed. The LED indicator light next to the High, Medium or Low will light up.
The timer can be used to either turn the unit on or off after a number of elapsed hours. The timer is adjustable between
|
|
|
| How to set the unit to automatically turn on: |
|
|
|
|
|
|
| 1) Press the Timer button while the unit is powered off. The Timer |
|
| |
|
|
|
| indicator LED will light up |
|
|
|
|
|
|
| 2) Use the Up and Down buttons to set the time (displayed in |
|
|
|
|
|
|
| hours). After the selected time passes, the unit will automatically |
|
|
|
|
|
|
| turn on. |
|
|
|
|
|
|
| How to set the unit to automatically turn off: |
|
|
|
|
|
|
| 1) Press the Timer button while the unit is powered on. The Timer |
|
| |
|
| NOTE: To cancel the | indicator LED will light up |
|
|
| |
|
| timer, press the Timer | 2) Use the Up and Down buttons to set the time (displayed in |
|
|
| |
|
| button or Power button. | hours). The unit will automatically turn off after the selected time |
|
|
| |
|
|
|
| elapses. |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| LCD Display | The LCD Display will show the ambient temperature by default. |
|
|
| |
|
|
|
| Pressing the Up and Down buttons will show the set temperature |
|
|
|
|
|
|
| for 15 seconds, and then revert to the room temperature. You can |
|
| |
|
|
|
| switch between Fahrenheit and Celsius by pressing both the Up |
|
|
|
|
|
|
| and Down Buttons simultaneously. The displayed range of the |
|
|
|
|
|
|
| ambient temperature is from 0º to 99º. Temperatures above 99º will |
|
| |
|
|
|
| be displayed as “Hi”, and temperatures below 0º will be displayed |
|
|
|
|
|
|
| as “Lo”. If you enabled the Timer, the LCD Display will show the |
|
|
|
|
|
|
| hour(s) set. |
|
|
|
|
|
|
|
|
| ||
| Water Light | In high humidity situations, the internal water reservoir may fill. The |
|
| |||
|
|
|
| unit will automatically shut off and the water light will turn on. Once |
|
| |
|
|
|
| the water is manually drained, the unit will operate normally. |
|
|
|
|
|
|
|
|
|
|
|
EdgeStar Portable Air Conditioner | 12 |
|
| ||||