EdgeStar AP12000S-1 owner manual Installing the Carbon Filter

Page 6

Installing the Carbon Filter

CAUTION: Never operate the air conditioner without the pre-filter attached.

Your portable air conditioner ships with a pre-filter and an activated carbon filter. The carbon filter will help remove contaminates and odors from the air. It is recommended you replace the carbon filter every two to three months, or as needed. It is necessary to clean the pre-filter periodically. Follow the steps below to install the carbon filter:

1. Pull the handle on the pre-filter straight up.

Filter frame

Pre-filter

Activated carbon filter

2.Separate the filter frame from the pre-filter.

3.Place the activated carbon filter on the pre-filter.

4.Reattach the filter frame.

5.Insert the assembled pre-filter into the back of the unit.

3

Image 6

Contents AP12000S-1 Important Safety Information Electrical SafetyTable of Contents Introduction For Your RecordsParts Identification Front View Control PanelBack View Pre-filter Installing the Carbon Filter Window Kit Installation Instructions Preparations for installing the window kitInstalling the grated adapter Installing the window plates Attaching the duct connectors to the exhaust hose Connecting the duct connector to the unit Connecting the duct connector to the grated adapterDraining the Unit Direct drainageButton IndicatorControl Panel Overview FunctionDehumidifying Mode PowerCooling Mode Operating the Control PanelLCD Display Fan Only ModeSpeed Timer Water LightUsing the Remote Control Power Button Mode ButtonTimer Button Buttons Function Energy Saving Guide Cleaning the pre-filter MaintenanceCleaning the unit Preparation for StorageTroubleshooting Issue Possible Cause SolutionTroubleshooting Issue Possible Cause SolutionSpecifications EdgeStar Limited Warranty One 1 Year Parts & Ninety 90 Days Labor