Preparations for installing the window kit
Window Kit Installation Instructions
You must vent your portable air conditioner when running in it cooling mode. Your unit includes a window exhaust kit that can be used to vent the unit out a window.
Before you begin, make sure you have all the parts necessary for installation.
Window Kit Parts List:
NOTE: Exhaust Covers may be attached to the Grated Adapters. You may need to twist and pull apart to separate them.
4 Screws
1 Exhaust Hose
2 Duct Connectors
1 Grated Adapter
1 Exhaust Cover
1 Window Kit Plate with Hole
1 Window Kit Plate
NOTE: You may need to contact your electrician if your room’s circuit is not able to power your unit.
If you have multiple windows, choose one that is near an electrical outlet that will be able to provide sufficient power to your unit. See the power requirements listed on the product label printed on the side, or on the back of your portable air conditioner.
Your window kit can be installed on a horizontal or vertical sliding window as shown in the following pictures:
Follow the instructions on the next pages to install the window kit.
EdgeStar Portable Air Conditioner | 4 |