General Safety Rules

FAILURE TO FOLLOW THESE RULES MAY RESULT IN SERIOUS PERSONAL INJURY.

•FOR YOUR OWN SAFETY, READ AND UNDERSTAND THE INSTRUCTION MANUAL BEFORE OPERATING THE UNIT. Learn the unit’s application and limitations as well as the specific hazards peculiar to it.

•KEEP WORK AREA CLEAN. Cluttered areas and benches invite accidents.

•DON’T USE IN DANGEROUS ENVIRONMENT. Don’t use this unit in damp or wet locations, or expose it to rain. Keep work area well-lighted.

•KEEP CHILDREN AND VISITORS AWAY. All children and visitors should be kept a safe distance from work area.

•DISCONNECT UNIT before servicing.

•CHECK DAMAGED PARTS. Before further use of the unit, properly repair or replace any part that is damaged.

FAILURE TO FOLLOW THESE RULES MAY RESULT IN SERIOUS INJURY.

do not use this UNIT to filter METAL dust. Combining wood and metal dust can create an explosion or fire hazard. This

unit is intended to filter non-explosive atmospheres only.

Do not use THIS UNIT to dissipate fumes or smoke.

Explosions or fire can result. This air cleaner is intended for use where only dry airborne dust is present. Its use should be limited to non-explosive, non-metallic atmospheres.

1.DO NOT operate this UNIT until it is completely assembled and installed according to the instructions. A unit incorrectly assembled can cause injury.

2.obtain advice from your supervisor, instructor, or another qualified person if you are not thoroughly familiar with the operation of this unit. Knowledge is safety.

3.FOLLOW ALL wiring codes and recommended electrical connections to prevent electrical shock or electrocution.

4.DO NOT LIFT THIS UNIT BY THE POWER CORD. Do not use the power cord as a hanging device. A damaged power cord can cause electrical shock or electrocution.

5.SECURELY ANCHOR THIS UNIT to a permanent or fixed supporting structure when suspending it from the ceiling. A falling unit can cause serious injury. Always keep a minimum of 7 feet between the bottom of the unit and the floor surface to allow for sufficient head clearance. Use only a chain rated for a minimum of 150 lb. working load to adequately hold the unit. Use steel S-Hooks that are at least 1/4" in diameter to suspend the unit from the ceiling. Lag-type bolts used to suspend the unit from the ceiling must be threaded at least 1-1/2" into supporting structural members.

6.SUPPORT THis unit or securely clamp it to the work surface when it is used in a portable application to eliminate potential injury and/or damage to the unit.

7.ENSURE THAT THE INTAKE AND EXHAUST AREAS ARE CLEAR prior to starting the unit. Clogged intakes or exhausts can cause an explosion and/or fire.

8.KEEP ARMS, HANDS, and fingers AWAY FROM THE FAN. Avoid all exposure to rotating parts to prevent injury.

9.DO NOT OPERATE THIS UNIT WITHOUT THE FILTERS IN PLACE. Dust and other small debris will go directly to the motor, causing over-heating and the potential for fire and/or explosion.

10.DO NOT ATTEMPT to remove or replace the filter(s) while the unit is running. Exposed fan blades can cause severe cuts. Make certain that the unit is disconnected from the power source.

11.MAINTAIN THE UNIT in top condition. Clogged filters can increase the potential for fire or explosion. Follow all instructions for changing and cleaning filters.

12.STORE THE UNIT in a location that eliminates the potential for damage to the power cord. A damaged power cord can cause shock or electrocution. Safely store power cord on the unit to eliminate tripping hazards.

13.TURN THE UNIT “OFF” and disconnect the unit from the power source before installing or removing accessories, before adjusting or changing set-ups, or when making repairs. An accidental start-up can cause serious injury.

14.UNPLUG machine from power source before servicing, changing filter, unclogging or cleaning unit.

15.REPLACE or repair damaged or worn cord immediately.

16.DO NOT operate any fan with a damage cord or plug. Discard fan or return to an authorized service facility for examination and/or repair.

17.DO NOT run cord under carpeting. DO NOT cover with throw rugs, runners, or similar coverings. Arrange cord away from traffic area and where it will not be tripped over.

SAVE THESE INSTRUCTIONS.

Refer to them often and use them to instruct others.

50-871 specifications

The Delta 50-871 is a state-of-the-art scroll saw designed for both amateur woodworkers and seasoned professionals seeking precision and versatility in their woodworking projects. This tool stands out for its unique blend of features, technologies, and characteristics that cater to a wide range of cutting needs.

One of the key features of the Delta 50-871 is its robust variable-speed motor, which allows users to adjust the speed from 400 to 1,750 strokes per minute. This flexibility is essential for achieving clean and accurate cuts in various materials, including hardwoods, softwoods, and even composites. The ability to fine-tune the speed also aids in managing intricate cuts, such as those needed for detailed scroll work.

The scroll saw is equipped with a large, 16-inch throat depth, which provides ample room for cutting larger workpieces without compromising precision. This generous size, combined with a rigid steel frame, ensures stability and reduces vibration during operation, resulting in smoother cuts and greater control.

Another highlight of the Delta 50-871 is its tool-less blade change system. This innovation allows users to easily and quickly switch blades without the need for additional tools, enhancing workflow and minimizing downtime. The saw is compatible with a wide variety of blade types, making it easy to tailor to specific projects.

The integrated dust blower is another intelligent feature, keeping the cutting line clear of sawdust, which enhances visibility and accuracy. Coupled with a sturdy work table that can be tilted up to 45 degrees, users can achieve a variety of cutting angles, providing even more versatility in their woodworking tasks.

Safety is a paramount consideration in the design of the Delta 50-871. It features an easy-to-access on/off switch, providing quick power control, while its blade guard ensures that users are protected during operation. Additionally, the saw is designed with a flat surface area that helps prevent tipping and increases stability during use.

In summary, the Delta 50-871 scroll saw offers a comprehensive blend of features and technologies ideal for anyone looking to achieve precision in woodworking. With its variable speed, large throat depth, easy blade changes, and safety features, it stands out as a reliable tool that meets the demands of various cutting applications. Whether you are creating intricate patterns or handling larger projects, the Delta 50-871 is equipped to deliver superior performance and craftsmanship.