Operation, Troubleshooting, Using the Remote Control

USING THE REMOTE CONTROL

To reduce the risk of fire or electric shock, do not use this unit with any

solid-state speed control device.

The remote control provided with this unit is not considered a solid-state device.

The Air Cleaner is equipped with a REMOTE CONTROL

(A) Fig.8A.

NOTE: The remote requires two (2) AAA batteries (not supplied). The Battery housing is located underneath the back cover.

Notice that the remote control has three control buttons (Fig. 8A): TIME (B), ON/OFF (C), and SPEED (D). These buttons correspond to the LED sensor panel on the rear of the machine (K) Fig. 8B.

NOTE: When the machine is connected to the power source, a green light (E) will be activated on the panel.

To activate the blower unit, press the "ON/OFF" button

(C)Fig. 8A. The machine will begin in the default speed of HIGH on the sensor panel. Press the SPEED button once, and the machine will run at the MEDIUM level. Press the SPEED button again, and the machine will run at the LOW level. Press the SPEED button a third time, and the machine will return to HIGH speed mode.

To turn the machine off, press the “ON/OFF” button (C) Fig. 8A.

This unit has a timer that can be set by remote control.

Fig. 8A

Fig. 8B

When the machine is ON in the speed setting desired, pressing the "TIME" button (B) Fig. 8A on the remote control will set the machine to run for one hour. Pressing the "TIME" button again will set the machine to run for two hours. Notice that the light on the sensor panel has now moved to the 2HR location (G) Fig. 8B. When the "TIME" button is pressed a third time, the machine will run for three hours. At this point the red light will show up under the 1HR and 2HR locations. When you press the "TIME" button a fourth time, the unit will run for four hours. Notice that the indicator light glows at the 4HR location. Pressing the "TIME" button further will increase the time settings in one hour increments to a maximum of fifteen hours.

All functions can be manually controlled by using the two buttons on the sensor panel (K) Fig. 8B.

OPERATION

NOTE: The air cleaner may produce a slight odor for the first few hours of operation due to the protective coating which is applied to internal components. This odor will dissipate and should be disregarded.

IMPORTANT: Never operate the air cleaner without air filters in place.

1.Make SURE that the filter material is correctly installed in place.

2.Plug in the power cord.

3.Press the ON/OFF button, START operation. (The RUN light will light up in the color of the relevant speed, and the POWER light will stop flashing.)

4.Press the TIMER button to set the time, the MAX time setting is 15 hours.

The DELTA® 50-871 3 Speed Air Cleaner can be used in

a.bench-top sanding applications.

b.circular saw applications.

c.dry wall applications.

d.shop cleaning applications.

e.floor sanding applications.

f.any other application where non-metallic dust is a factor.

TROUBLESHOOTING

For assistance with your machine, visit our website at www.DeltaMachinery.com for a list of service centers or call the DELTA® Power Equipment Corporation help line at 1-800-223-7278.

50-871 specifications

The Delta 50-871 is a state-of-the-art scroll saw designed for both amateur woodworkers and seasoned professionals seeking precision and versatility in their woodworking projects. This tool stands out for its unique blend of features, technologies, and characteristics that cater to a wide range of cutting needs.

One of the key features of the Delta 50-871 is its robust variable-speed motor, which allows users to adjust the speed from 400 to 1,750 strokes per minute. This flexibility is essential for achieving clean and accurate cuts in various materials, including hardwoods, softwoods, and even composites. The ability to fine-tune the speed also aids in managing intricate cuts, such as those needed for detailed scroll work.

The scroll saw is equipped with a large, 16-inch throat depth, which provides ample room for cutting larger workpieces without compromising precision. This generous size, combined with a rigid steel frame, ensures stability and reduces vibration during operation, resulting in smoother cuts and greater control.

Another highlight of the Delta 50-871 is its tool-less blade change system. This innovation allows users to easily and quickly switch blades without the need for additional tools, enhancing workflow and minimizing downtime. The saw is compatible with a wide variety of blade types, making it easy to tailor to specific projects.

The integrated dust blower is another intelligent feature, keeping the cutting line clear of sawdust, which enhances visibility and accuracy. Coupled with a sturdy work table that can be tilted up to 45 degrees, users can achieve a variety of cutting angles, providing even more versatility in their woodworking tasks.

Safety is a paramount consideration in the design of the Delta 50-871. It features an easy-to-access on/off switch, providing quick power control, while its blade guard ensures that users are protected during operation. Additionally, the saw is designed with a flat surface area that helps prevent tipping and increases stability during use.

In summary, the Delta 50-871 scroll saw offers a comprehensive blend of features and technologies ideal for anyone looking to achieve precision in woodworking. With its variable speed, large throat depth, easy blade changes, and safety features, it stands out as a reliable tool that meets the demands of various cutting applications. Whether you are creating intricate patterns or handling larger projects, the Delta 50-871 is equipped to deliver superior performance and craftsmanship.