Desa RLP100 Propane Supply, Installation, Amount of propane gas in tanks Temperature of tanks

Page 4

PROPANE SUPPLY

Propane gas and propane tank(s) are to be fur- nished by the user.

Use this heater only with a propane vapor withdrawal supply system. See Chapter 5 of the Standard for Storage and Handling of Liquefied Petroleum Gas, ANSI/NFPA 58 and the Propane Installation Code CAN/CGA B149.2. Your local library or fire department will have this booklet.

The amount of propane gas ready for use from pro- pane tanks varies. Two factors decide this amount:

1.The amount of propane gas in tank(s)

2.The temperature of tank(s)

The chart below shows the number of 100 pound (45 kg) tanks needed to run this heater.

Temperature [°F (°C)]

Number of tanks,

at Tank

100,000 Btu/Hr

32°F (0°C)

2

20°F (-6.7°C)

2

10°F (-12.2°C)

3

0°F (-17.8°C)

3

-10°F (-23.3°C)

(Use larger tank)

-20°F (-28.9°C)

(Use larger tank)

Less gas is vaporized at lower temperatures. You may need two or more 100 pound (45 kg) tanks or one larger tank in colder weather. Your local propane gas dealer will help you select the proper supply system. The minimum surrounding air tem- perature rating for each heater is -20°F (-29°C).

INSTALLATION

WARNING:Reviewandunder- stand the warnings in the Safety Information section, page 2. They are needed to safely operate this heater. Follow all local codes when using this heater.

WARNING: Test all gas pip- ing and connections for leaks after installing or servicing. Never use an open flame to check for a leak. Apply a mix- ture of liquid soap and water to all joints. Bubbles forming show a leak. Correct all leaks at once.

1.Provide propane supply system (see Propane Supply above).

2.Connect fuel gas connector fitting on hose/regu- lator assembly to propane tank(s). Turn counter- clockwise into threads on tank valve. Tighten firmly using wrench. IMPORTANT: Tighten regulator with vent pointing down. Pointing vent down protects regulator from weather damage.

3.Connect hose to inlet connector. Tighten firmly using a wrench.

IMPORTANT: Extra hose or piping may be used if needed. Install extra hose or piping between hose/regulator assembly and propane tank. You must use the regulator supplied with heater.

4.Open propane supply valve on propane tank(s) slowly. Note: If not opened slowly, excess- flow check valve on propane tank will stop gas flow. If this happens, close propane supply valve and open again slowly.

5.Check all connections for leaks.

6.Close propane supply valve.

 

Hose

Supply

Regulator

Valve

 

Propane

Vent

Tank

(pointing down)

 

 

Fuel Gas

 

Connector

Figure 3 - Regulator With Vent

 

Pointing Down

100,000 Btu/Hr

Model Shown

Inlet Connector

Hose

 

Figure 4 - Hose and Inlet Connector

4

www.desatech.com

111710-01B

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Table of Contents General Hazard WarningSafety Information Product Identification UnpackingInstallation Amount of propane gas in tanks Temperature of tanksPropane Supply Provide propane supply system see Propane Supply aboveVentilation OperationTo Start Heater To Stop HeaterMaintenance Have heater inspected yearly by a qualified service agencyClean fan blades each season or as needed see Fan, StorageTroubleshooting Observed Fault Possible Cause RemedyMotor Service ProceduresWith heater on its side, remove base tray FAN Spark TransformerIgnitor Removing Ignitor Mounting Screw and IgnitorWiring Diagram Specifications Output Rating Btu/HrPsi 65.98 Kpa Heater 26.25 x 9 xReplacement Parts Technical ServiceAccessories Illustrated Parts Breakdown Parts List 100,000 Btu/Hr Models RM100LP and RLP100Warranty and Repair Service Keep this WarrantyLimited Warranty Warranty ServiceAdvertencia General DE Peligro ETC., Comuníquese CON EL Fabricante Tabla DE ContenidoInformación DE Seguridad Identificación DEL ProductoDesempaque Teoría DEL FuncionamientoInstalación Debe aprovisionar el usuarioDe 45 kg 100 lb que se necesitan para hacer Funcionar este calentadorVentilación Para Encender EL CalentadorCierre la válvula del suministro de propano Adicional si se utilizan más calentadores. FuncionamientoAlmacenamiento MantenimientoPara Apagar EL Calentador Desconecte el calentadorSolución DE Problemas El calentador se apaga 1. Es posible que el suministro de Propano no sea el adecuadoApague el calentador Flujo restringido del aireProcedimientos DE Servicio Vuelva a colocar la charola de la baseVentilador Transformador DE ChispaSeque completamente el ventilador Desmonte la charola de la baseConecte el cable del ignitor Extraiga el ignitor de la cabeza posteriorPruebe a ver si se produce una chispa Especificaciones Diagrama DEL CableadoModelo DE 100.000 BTU/H Servicio Técnico Piezas DE RepuestoAccesorios Piezas CON GarantíaClasificación Ilustrada DE Piezas Modelos DE 100.000 BTU/H RM100LPLista DE Piezas 100.000 BTU/H Modelos RM100LP Y RLP100Garantía Y Servicio DE Reparación Guarde Esta GarantíaGarantía Limitada Servicio DE Garantía

RLP100 specifications

Desa RLP100 is an innovative technological marvel designed for both indoor and outdoor applications. As a compact and versatile solution, it combines cutting-edge features and reliable performance in one package. The RLP100 is designed with user convenience and efficiency in mind, making it an ideal choice for various sectors, including residential, commercial, and industrial environments.

One of the standout features of the Desa RLP100 is its energy efficiency. Utilizing advanced energy-saving technologies, this device optimally manages power consumption while maintaining high performance levels. This not only reduces operational costs for users but also contributes positively to environmental conservation.

The RLP100 is equipped with a state-of-the-art control system that allows for seamless integration with modern smart home technologies. Users can easily manage settings through a mobile application or centralized control units, providing remote access and enhancing user experience. The system supports voice commands, making it compatible with popular virtual assistants, thus catering to a growing demand for smart living solutions.

Safety is a top priority with the RLP100, which comes with an array of built-in safety features. These include automatic shut-off mechanisms, temperature regulation, and fault detection systems that alert users to potential issues. Such robust safety measures not only protect users but also enhance the longevity of the device.

The Desa RLP100 is designed for adaptability, featuring adjustable settings that can be customized to meet the specific needs of different environments. Whether it’s heating, cooling, or air purification, the RLP100 delivers results that can be tailored to user preferences. Its compact design ensures that it can fit into small or constrained spaces without compromising performance.

Moreover, the RLP100 employs innovative filtration technologies that ensure optimal air quality. With multi-layer filtration systems, it effectively removes allergens, dust, and other pollutants, making it a significant asset for health-conscious users. This feature is particularly beneficial in urban areas where air quality can be a concern.

In summary, the Desa RLP100 embodies modern technology with its impressive features, user-friendly design, and a strong focus on safety and efficiency. Its ability to adapt to varying needs, coupled with its smart integration capabilities, positions it as a leader in the market, appealing to anyone seeking a reliable and advanced solution for enhancing their living or working environment.
Top Page Image Contents