Desa RLP100 owner manual Ventilation, Operation, To Start Heater, To Stop Heater

Page 5

VENTILATION

WARNING: Follow the mini- mum fresh, outside air ventila- tion requirements. If proper fresh, outside air ventilation is not provided, carbon monoxide poisoning can occur. Provide proper fresh, outside air ventila- tion before running heater.

Provide a fresh air opening of at least three square feet for each 100,000 Btu/Hr rating. Provide extra fresh air if more heaters are being used.

OPERATION

WARNING: Follow the mini- mum fresh, outside air ventila- tion requirements. If proper fresh, outside air ventilation is not provided, carbon monoxide poisoning can occur. Provide proper fresh, outside air ventila- tion before running heater.

WARNING: Review and un- derstand the warnings in the Safety Information section, page

2.They are needed to safely op- erate this heater. Follow all local codes when using this heater.

TO START HEATER

1.Follow all installation, ventilation and safety information.

2.Locate heater on stable and level surface. Make sure strong drafts do not blow into front or rear of heater.

3.Make sure the control knob is in the OFF position.

4.Plug power cord of heater into a three-prong, grounded extension cord. Extension cord must be at least six feet (1.83 m) long, UL/CSA listed and of a proper size.

Extension Cord Size Requirement

Up to 100 feet (30.48 m) long, use 16 AWG rated cord.

101 to 200 feet (30.78 to 6.96 m) long, use 14 AWG rated cord.

5.Plug extension cord into a 120 volt/60 hertz, 3-hole, grounded outlet. Motor will start. Fan will turn, forcing air out front of heater.

6.Open propane supply valve on propane tank(s) slowly. Note: If not opened slowly, excess-flow check valve on propane tank will stop gas flow. You may hear a click from the excess-flow check valve closing. If this happens, reset the excess-flow check valve by closing propane supply valve and open again slowly.

7.Press and hold in control knob. Turn counter- clockwise to the LOW position. Heater should ignite within a few seconds.

Note: If heater fails to ignite, hose may have air in it. If so, keep control knob pressed and wait 20 seconds. Release automatic control valve button and wait 20 seconds for unburned fuel to exit heater. Repeat step 7.

8.After heater ignites, wait 30 seconds. This ac- tivates the automatic control system. Release the control knob.

9.When burner remains lit, set heater at the desired heat level by turning the control valve counterclockwise. If burner goes out, turn off gas. Turn control knob fully clockwise to the lowest position. Check fuel supply. If adequate fuel is available, restart heater beginning at step 1.

TO STOP HEATER

1.Tightly close propane supply valve on propane tank(s).

2.Wait a few seconds. Heater will burn gas left in supply hoses.

3.Turn control knob to the OFF position.

4.Unplug heater.

111710-01B

www.desatech.com

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents General Hazard Warning Table of ContentsSafety Information Unpacking Product IdentificationAmount of propane gas in tanks Temperature of tanks InstallationPropane Supply Provide propane supply system see Propane Supply aboveOperation VentilationTo Start Heater To Stop HeaterHave heater inspected yearly by a qualified service agency MaintenanceClean fan blades each season or as needed see Fan, StorageObserved Fault Possible Cause Remedy TroubleshootingWith heater on its side, remove base tray Service ProceduresMotor Spark Transformer FANRemoving Ignitor Mounting Screw and Ignitor IgnitorWiring Diagram Output Rating Btu/Hr SpecificationsPsi 65.98 Kpa Heater 26.25 x 9 xAccessories Technical ServiceReplacement Parts Illustrated Parts Breakdown 100,000 Btu/Hr Models RM100LP and RLP100 Parts ListKeep this Warranty Warranty and Repair ServiceLimited Warranty Warranty ServiceETC., Comuníquese CON EL Fabricante Tabla DE Contenido Advertencia General DE PeligroInformación DE Seguridad Producto Identificación DELDesempaque Teoría DEL FuncionamientoDebe aprovisionar el usuario InstalaciónDe 45 kg 100 lb que se necesitan para hacer Funcionar este calentadorPara Encender EL Calentador VentilaciónCierre la válvula del suministro de propano Adicional si se utilizan más calentadores. FuncionamientoMantenimiento AlmacenamientoPara Apagar EL Calentador Desconecte el calentadorSolución DE Problemas Propano no sea el adecuado El calentador se apaga 1. Es posible que el suministro deApague el calentador Flujo restringido del aireVuelva a colocar la charola de la base Procedimientos DE ServicioTransformador DE Chispa VentiladorSeque completamente el ventilador Desmonte la charola de la basePruebe a ver si se produce una chispa Extraiga el ignitor de la cabeza posteriorConecte el cable del ignitor Modelo DE 100.000 BTU/H Diagrama DEL CableadoEspecificaciones Piezas DE Repuesto Servicio TécnicoAccesorios Piezas CON GarantíaModelos DE 100.000 BTU/H RM100LP Clasificación Ilustrada DE Piezas100.000 BTU/H Modelos RM100LP Y RLP100 Lista DE PiezasGuarde Esta Garantía Garantía Y Servicio DE ReparaciónGarantía Limitada Servicio DE Garantía

RLP100 specifications

Desa RLP100 is an innovative technological marvel designed for both indoor and outdoor applications. As a compact and versatile solution, it combines cutting-edge features and reliable performance in one package. The RLP100 is designed with user convenience and efficiency in mind, making it an ideal choice for various sectors, including residential, commercial, and industrial environments.

One of the standout features of the Desa RLP100 is its energy efficiency. Utilizing advanced energy-saving technologies, this device optimally manages power consumption while maintaining high performance levels. This not only reduces operational costs for users but also contributes positively to environmental conservation.

The RLP100 is equipped with a state-of-the-art control system that allows for seamless integration with modern smart home technologies. Users can easily manage settings through a mobile application or centralized control units, providing remote access and enhancing user experience. The system supports voice commands, making it compatible with popular virtual assistants, thus catering to a growing demand for smart living solutions.

Safety is a top priority with the RLP100, which comes with an array of built-in safety features. These include automatic shut-off mechanisms, temperature regulation, and fault detection systems that alert users to potential issues. Such robust safety measures not only protect users but also enhance the longevity of the device.

The Desa RLP100 is designed for adaptability, featuring adjustable settings that can be customized to meet the specific needs of different environments. Whether it’s heating, cooling, or air purification, the RLP100 delivers results that can be tailored to user preferences. Its compact design ensures that it can fit into small or constrained spaces without compromising performance.

Moreover, the RLP100 employs innovative filtration technologies that ensure optimal air quality. With multi-layer filtration systems, it effectively removes allergens, dust, and other pollutants, making it a significant asset for health-conscious users. This feature is particularly beneficial in urban areas where air quality can be a concern.

In summary, the Desa RLP100 embodies modern technology with its impressive features, user-friendly design, and a strong focus on safety and efficiency. Its ability to adapt to varying needs, coupled with its smart integration capabilities, positions it as a leader in the market, appealing to anyone seeking a reliable and advanced solution for enhancing their living or working environment.
Top Page Image Contents