PRODUCT
IDENTIFICATION
WARNING: Failure to posi- tion the parts in accordance with these diagrams or failure to use only parts specifically approved with this appliance may result in property damage or personal injury.
Ember Pod
Log Set
Assembly
Piezo 
Ignitor
Chassis
Control Assembly
Knobs
Figure 1 - Product Identification
UNPACKING
CAUTION: Do not remove the data plates from the grate as- sembly. The data plates contain important warranty and safety information.
1.Remove log set assembly from carton.
IMPORTANT: Do not pick up assembly by logs. This could damage the unit. Always handle assembly by grate.
2.Remove all protective packaging applied to log set for shipment.
3.Check all items for any shipping damage. If damaged, promptly inform dealer where you bought appliance.
PRODUCT FEATURES
This unitized gas log set is tested and approved to ANSI
This unit has a piezo ignitor. This system requires no matches, batteries or other sources to light ap- pliance.
INSTALLATION
WARNING: A qualified ser- vice person must install heater. Follow all local codes.
WARNING: Before installing in a solid fuel burning fireplace, the chimney flue and firebox must be cleaned of soot, creo- sote, ashes and loose paint by a qualified chimney cleaner. Creo- sote will ignite if highly heated. A dirtychimneyfluemaycreateand distribute soot within the house. Inspectchimneyfluefordamage. If damaged, repair flue damper before operating appliance.
CAUTION:Thisheatercreates warmaircurrents.Thesecurrents move heat to wall surfaces next to heater. Installing heater next to vinyl or cloth wall coverings or operatingheaterwhereimpurities (such as, but not limited to, to- bacco smoke, aromatic candles, cleaning fluids, oil or kerosene lamps, etc.) in the air exist, may discolor walls or cause odors.
NOTICE: Installation, service and repair of this appliance must be performedbyaqualifiedinstaller, service agency, company or gas supplier experienced with this type of gas appliance. Only factory authorized components listed in these instructions may be used in accordance with the manufacturer's instructions and all codes and requirements of the authority having jurisdiction. Any modifications to or use of unauthorized components or accessory items will void the manufacturer’swarrantyandmay result in a hazardous condition.
www.desatech.com | 5 |