Cleaning and maintaining
You must turn off the emergency switch before cleaning POWERbot.
Cleaning the dustbin
Clean the dustbin when filter inspection indicator ( 
) turns on or if there's too much dust in the dustbin.
1 Remove the dustbin
2 Removecover the dustbin
3 Remove dust in the dustbin and cyclone unit
"Click"
4 Detach the cyclone unit from the dustbin cover then wash the dustbin and the filter
5 Reassembledustbin the
6 Reinsert the dustbin into the main body until it clicks
Cleaning the sensors and the camera
Lightly wipe with soft cloth.
Camera 
Front sensor | Cliff sensors | Rear sensor | |
window | window | ||
|