Quadra-Fire QUADRA-FIRE CONTOUR warranty Trim Ring Installation Instructions, 811-0820

Page 22

Contour Pellet Stove

TRIM RING INSTALLATION INSTRUCTIONS

Part #811-0820

Kit Contents: Trim Ring (1); 8-32 Nuts (6)

Grille

Tools Required: Phillips head screwdriver; 11/32" wrench or nut driver; small screwdriver or punch.

FIG. 1

NOTE: Front Face and Door can be removed from stove while attached together, or you may leave the Door on the hinges while you remove the Front Face from the Door.

Rib

Face

1 If leaving the Door on the hinges, hold the Front Face

Rib

in place while removing the screws from Grille so that it

 

does not fall forward and potentially become damaged.

 

Remove Grille and set aside. See Fig. 1

Locating Screws

 

(on rib, the two

 

Door

FIG. 2

2. Tilt the top of the Front Face forward until the top rib

 

clears the door, then slide the face down until the locat-

 

ing screws on the bottom rib are completely out of the

 

door.

 

See Fig. 2

 

3.

 

Lay Front Face on protective surface, face side down

 

Use a small screwdriver or punch to push filler buttons

 

out. See Fig. 3

 

NOTE: The holding tabs on the back side of the but-

 

tons have been bent over to secure for shipping.

 

You must bend the tabs back up to remove the but-

 

tons.

FIG. 3

4Touch-up area around holes with paint supplied with stove.

Locating Screws (on rib, the two

October 10, 2001

22

250-5583

Page 21 Page 23
Image 22
Page 21 Page 23
Contents INSTALLATION, OPERATION, and Maintenance Instructions Important Safety NotesContour Pellet Stove Table of Contents Safety Label Label Location Behind Left Side Curtain on Outside of HopperListings and Specifications DimensionsClearances to Combustibles Venting Graph Chimney and Exhaust ConnectionVent Termination Requirements Venting Pipe TableAlcove Venting SystemsThrough the Wall Through the Wall & Vertical Venting SYSTEMS, ContdVertical MasonryFeed Adjustment TOP Vent Flue Adapter InstallationFuel Adjustment Rod Wing Nut Piece LOG SET Installation LOG SET Placement InstructionsOptional Firepot Twig Installation Operating Instructions Mobile Home InstallationThermostat Installation Fuel Size and Material Wood PelletsHeat Output Controls Operating InstructionsStart Your First Fire General Operation InformationFirepot Cleaning and MaintenanceFirebox ASH Removal Blowers Cleaning and Maintenance ContdReading the Fire and Adjustment Procedures Soot and FLY ASH Formation and Need for RemovalPower Supply Component InformationComponent INFORMATION, Contd ThermocoupleComponent Information Contd IgniterTroubleshooting Troubleshooting Contd Large FIRE, ASH Buildup and Dirty Glass Wiring HarnessUnit BURNING, no Call Light See Fig Hose Clamp Collar AssemblyFlex Hose Trim Ring Installation Instructions 811-0820Trim Ring INSTRUCTIONS, Contd Place. See FigExhaust Blower Replacement Instructions 812-4400 Blower Remove Wires from Lower Rear ScreenTOP Baffle Removal Instructions See FigureAccessories Service PartsLifetime Warranty Division of Hearth Technologies Inc

QUADRA-FIRE CONTOUR specifications

The Quadra-Fire Contour is a remarkable addition to the realm of contemporary heating solutions, marrying elegant design with cutting-edge technology to deliver an efficient and user-friendly experience. Designed for versatility, the Contour is a superb choice for homeowners seeking efficient heating options that also enhance the beauty of their living spaces.

One of the standout features of the Quadra-Fire Contour is its impressive heating capacity. It can deliver up to 2,000 square feet of warmth, making it ideal for both smaller and larger areas. This flexibility allows homeowners to reduce their reliance on traditional heating systems, potentially lowering energy costs during colder months.

The Contour is equipped with Quadra-Fire’s renowned Advanced Combustion Technology, which optimizes fuel efficiency and reduces emissions. This technology ensures a clean burn while extracting maximum heat from the fuel, allowing users to enjoy extended burn times with minimal refueling. With its ability to operate with different fuel options, including wood and pellets, the Contour caters to various preferences and needs.

A key characteristic of the Contour is its stylish aesthetic. With a sleek and modern appearance, this stove seamlessly fits into any decor. The large viewing window provides an inviting view of the flames, adding a cozy ambiance to any setting. This not only enhances the atmosphere but also provides a functional heating source without compromising on style.

Featuring a user-friendly control system, the Quadra-Fire Contour allows for easy operation. The intuitive controls enable users to adjust the heat output and air control settings with ease. This ensures a customizable experience, as one can easily modify the stove's performance to suit their specific heating requirements.

In terms of installation, the Contour offers flexible venting options, allowing for both direct venting and conventional chimney setups. This versatility ensures that homeowners can easily integrate the stove into their existing infrastructure without significant modifications.

In conclusion, the Quadra-Fire Contour stands out as a leading choice for efficient and stylish home heating. Its advanced technology, impressive heating capabilities, and aesthetic appeal make it a valuable addition to any home. Whether you're looking to enhance your living space or invest in an efficient heating solution, the Contour provides an answer that combines form and function seamlessly.
Top Page Image Contents