Quadra-Fire QUADRA-FIRE CONTOUR warranty TOP Baffle Removal Instructions, See Figure

Page 25

Contour Pellet Stove

Rear Screen Replacement Kit Instructions

Part #812-4510

Included in Kit: 1 Rear Replacement Screen

Tools Required: Phillips screwdriver

1.Lift off both side curtains.

2.Unscrew lower screw ONLY on each side curtain mounting bracket.

3.Detach vacuum switch from rear screen (2 screws).

4.Remove and retain the 10 screws from the existing rear screen and remove screen from stove. Discard old screen.

5.Attach new screen to rear of stove using 10 screws removed in step 4.

6.Re-attach vacuum switch to rear screen.

7.Re-attach lower screw to side mounting brackets.

8.Attach side curtains and align if necessary by adjusting lower screw on side mounting brackets.

Vacuum

Switch

Lower mounting bracket screw

Mounting Bracket

TOP BAFFLE REMOVAL INSTRUCTIONS

Your new Contour stove has a latch to keep the top baffle from coming out during shipment or when

the heat exchanger scraper rods are pulled.

Latch

Second

 

Notch

Latch

 

Face of Stove

FIGURE 2.

FIGURE 1.

Top Baffle

Second Notch

1)To remove the top baffle for periodic thorough cleaning of the heat exchanger, first locate the latch. It is located between the front edge of the top baffle and the inside of the firebox centered from side to side. The latch pivots up and down.

2)Push the latch up with your finger while sliding the top baffle forward and down. See FIGURE 1

3)To reinstall the top baffle, align the hooks on the baffle with the slots in the baffle hangers, push up and slide back.

See FIGURE 2.

4)Make sure the latch drops back into position, bypassing the first notch and catching the front edge of the top baffle with the second small notch.

October 10, 2001

25

250-5583

Page 24 Page 26
Image 25
Page 24 Page 26
Contents Important Safety Notes INSTALLATION, OPERATION, and Maintenance InstructionsContour Pellet Stove Table of Contents Label Location Behind Left Side Curtain on Outside of Hopper Safety LabelListings and Specifications DimensionsClearances to Combustibles Vent Termination Requirements Chimney and Exhaust ConnectionVenting Graph Venting Pipe TableAlcove Venting SystemsThrough the Wall Vertical Venting SYSTEMS, ContdThrough the Wall & Vertical MasonryFeed Adjustment TOP Vent Flue Adapter InstallationFuel Adjustment Rod Wing Nut Piece LOG SET Installation LOG SET Placement InstructionsOptional Firepot Twig Installation Thermostat Installation Mobile Home InstallationOperating Instructions Fuel Size and Material Wood PelletsStart Your First Fire Operating InstructionsHeat Output Controls General Operation InformationFirepot Cleaning and MaintenanceFirebox ASH Removal Reading the Fire and Adjustment Procedures Cleaning and Maintenance ContdBlowers Soot and FLY ASH Formation and Need for RemovalComponent Information Power SupplyThermocouple Component INFORMATION, ContdIgniter Component Information ContdTroubleshooting Troubleshooting Contd Large FIRE, ASH Buildup and Dirty Glass Wiring HarnessUnit BURNING, no Call Light See Fig Hose Clamp Collar AssemblyFlex Hose 811-0820 Trim Ring Installation InstructionsPlace. See Fig Trim Ring INSTRUCTIONS, ContdBlower Remove Wires from Lower Rear Screen Exhaust Blower Replacement Instructions 812-4400See Figure TOP Baffle Removal InstructionsService Parts AccessoriesLifetime Warranty Division of Hearth Technologies Inc

QUADRA-FIRE CONTOUR specifications

The Quadra-Fire Contour is a remarkable addition to the realm of contemporary heating solutions, marrying elegant design with cutting-edge technology to deliver an efficient and user-friendly experience. Designed for versatility, the Contour is a superb choice for homeowners seeking efficient heating options that also enhance the beauty of their living spaces.

One of the standout features of the Quadra-Fire Contour is its impressive heating capacity. It can deliver up to 2,000 square feet of warmth, making it ideal for both smaller and larger areas. This flexibility allows homeowners to reduce their reliance on traditional heating systems, potentially lowering energy costs during colder months.

The Contour is equipped with Quadra-Fire’s renowned Advanced Combustion Technology, which optimizes fuel efficiency and reduces emissions. This technology ensures a clean burn while extracting maximum heat from the fuel, allowing users to enjoy extended burn times with minimal refueling. With its ability to operate with different fuel options, including wood and pellets, the Contour caters to various preferences and needs.

A key characteristic of the Contour is its stylish aesthetic. With a sleek and modern appearance, this stove seamlessly fits into any decor. The large viewing window provides an inviting view of the flames, adding a cozy ambiance to any setting. This not only enhances the atmosphere but also provides a functional heating source without compromising on style.

Featuring a user-friendly control system, the Quadra-Fire Contour allows for easy operation. The intuitive controls enable users to adjust the heat output and air control settings with ease. This ensures a customizable experience, as one can easily modify the stove's performance to suit their specific heating requirements.

In terms of installation, the Contour offers flexible venting options, allowing for both direct venting and conventional chimney setups. This versatility ensures that homeowners can easily integrate the stove into their existing infrastructure without significant modifications.

In conclusion, the Quadra-Fire Contour stands out as a leading choice for efficient and stylish home heating. Its advanced technology, impressive heating capabilities, and aesthetic appeal make it a valuable addition to any home. Whether you're looking to enhance your living space or invest in an efficient heating solution, the Contour provides an answer that combines form and function seamlessly.
Top Page Image Contents