SET DELAY START
If the end timer is entered after the cook timer has already been set, the cook timer and the end timer are calculated and if necessary the oven sets a delay start point.
WARNING: Do not leave the food for too long time in the oven as food may spoil.
1.Press 
key, cook timer figure will blink.
2.Turn the multi function selector to apply the time for cook timer.
3.Press 
key, end timer figure will blink.
4.Turn the multi function selector to apply the time for end timer.
5.The delay start point is automatically calculated and the oven is waiting until delay start point.
The cook timer, end timer and delay start can be set after cooking function setting.
SET KITCHEN TIMER
The kitchen timer can be set independently of the oven function and used with cook timer or end timer at the same time. As kitchen timer has it’s own signal you can discriminate it from others.
1.Press 
key, kitchen timer figure will blink.
2.Turn the multi function selector, to apply the desired time for kitchen timer.
3.Press 
key again.
To cancel the kitchen timer, press the hold 
key for two seconds.
The kitchen timer can be reset in the same order as above and when the setted time is over, the display shows blinking “0:00” with a signal.
other settings
TONE SIGNAL
To activate or deactivate the tone signal, press and hold the 
seconds.
key for 3
OVEN LIGHT
Press 
key to turn on and off.
For energy saving, the oven lamp is switched off in a few minutes after the start of a cooking.
CHILD LOCK
To activate or deactivate the child lock function, press and hold 
key for 3 seconds.
Display will show the 
when the child lock function is activated. You can use the child lock function during cooking also. In this case every keys and selector knob will not react but you can switch off by turning the operation knob to off.
SWITCH OFF
When the oven has been switched off every heating elements stop operating. The cooling fan will continue to run for a while after the oven has been switched off for safety.