Samsung CE1000-TS/SLI manual Installing your microwave oven, Setting the time, To display the time

85 cm of 10 cm on

the floor the side

20 cm above

10 cm behind

Installing your microwave oven

Place the oven on a flat level surface 85cm above the floor. The surface should be strong enough to safety bear the weight of the oven.

1. When you install your oven, make sure there is adequate ventilation for your oven by leaving at least 10 cm (4 inches) of space behind and, on the sides

of the oven and 20 cm (8 inches) of space above.

2.Remove all packing materials inside the oven. Install the roller ring and turntable.

Check that the turntable rotates freely.

3.This microwave oven has to be positioned so that plug is accessible.

If the supply cord is damaged, it must be replaced by a special cord or assembly available from the manufacturer or its service agent.

For your personal safety, plug the cable into a 3-pin, 230 Volt, 50 Hz, AC earthed socket. If the power cable of this appliance is damaged, it must be replaced by a special cable.

Do not install the microwave oven in hot or damp surroundings like next to a traditional oven or radiator. The power supply specifications of the oven must be respected and any extension cable used must be of the same standard as the power cable supplied with the oven. Wipe the interior and the door seal with a damp cloth before using your microwave oven for the first time.

Setting the time

Your microwave oven has an inbuilt clock. When power is supplied, “:0”, “88:88” or “12:00” is automatically displayed on the display.

Please set the current time. The time can be displayed in either the 24- hour or 12-hour notation. You must set the clock:

• When you first install your microwave oven

• After a power failure

Do not forget to reset the clock when you switch to and from summer and winter time.

1. To display the time	Then press the Clock
in the...	button...
12-hour notation	Once
24-hour notation	Twice

2. Turn the dial knob to set the hour.

3. Press the Clock button.

4. Turn the dial knob to set the minute.

5. When the right time is displayed, press the Clock button to start the clock.

Result: The time is displayed whenever you are not using the microwave oven.

9

ENGLISH

CE1000-TS_SLI_DE68-04061A-01_EN.indd 9

2011-09-28 ￿￿ 4:21:19