Quadra-Fire CUMBGAP-MBK warranty Cumberland Gap, Non-Catalytic, Front/Side Load, Wood Heater

Page 1

R

Cumberland Gap

Non-Catalytic, Front/Side Load, Wood Heater

Owner’s Manual

Installation and Operation

 

Tested and

O-T L

Portland

Models:

Listed by

Oregon USA

OMNI-Test Laboratories, Inc.

 

 

C

US

CUMBGAP-MBK

CUMBGAP-PMH

CAUTION

DO NOT DISCARD THIS MANUAL

Important operating

Read, understand and

Leave this manual with

and maintenance

follow these instructions

party responsible for

instructions included.

for safe installation and

use and operation.

 

operation.

 

DO DISCARDNOT

WARNING

If the information in these instructions is not followed exactly, a fire may result causing property damage, personal injury, or death.

Do not store or use gasoline or other

flammable vapors and liquids in the vicinity of this or any other appliance.

Do not overfire - If heater or chimney connector glows, you are overfiring. Overfiring will void your warranty.

Comply with all minimum clearances to combustibles as specified. Failure to comply may cause house fire.

Installation and service of this appliance should be performed by qualified personnel. Hearth & Home Technologies recommends NFI certified professionals, or technicians supervised by an NFI certified professional.

WARNING

HOT SURFACES!

Glass and other surfaces are hot during operation AND cool down.

Hot glass will cause burns.

Do not touch glass until it is cooled

NEVER allow children to touch glass

Keep children away

CAREFULLY SUPERVISE children in same room as fireplace.

Alert children and adults to hazards of high temperatures.

High temperatures may ignite clothing or other flammable materials.

Keep clothing, furniture, draperies and other flammable materials away.

WARNING

Fire Risk.

For use with solid wood fuel only. Other fuels may overfire and generate poisonous gases (i.e. carbon monoxide).

www.quadrafire.com

7006-188G

November 5, 2010

Image 1
Contents Non-Catalytic, Front/Side Load, Wood Heater Cumberland GapCumberland Gap Wood Stove Testing LabSerial Number Model NameTable of Contents Appliance Certification Cumberland Gap Wood Stove Listing and Code ApprovalsBTU & Efficiency Specifications Mobile Home ApprovedDesign, Installation & Location Considerations Fire SafetyGetting Started Cumberland Gap Wood Stove Asphyxiation RiskWindward Negative PressureVenting Systems Flue Draft ConsiderationsTools And Supplies Needed Inspect Appliance & Components and Pre-Burn Check ListStove system with masonry chimney consists of Figure Typical Stove SystemsAppliance Dimensions Dimensions and ClearancesSingle Wall-USA Clearances To Combustibles UL And ULCDouble Wall-USA Hearth Protection Requirements Installation ConsiderationsUSA Required Canada Recommended Calculating Alternate Floor Protection MaterialCompleted View Reversible Flue Collar and Horizontal Flue Heat ShieldBaffle Diverter Baffle DiverterFire Risk Slanted corner Straight end to the backCumberland Gap Wood Stove Baffle Diverter Is shipped Inside fireboxCut Ends Hand Bend #1 Hand bend #2 Straight End Side Fuel-Loading-Door Locking Mechanism Leg Leveling SystemInstructions To Unlock Side Fuel Door Outside Air Kit Installation Installation Of Optional Blower Venting Components Cumberland Gap Wood Stove Chimney RequirementsChimney Systems Air Clearances ComponentsInstructions Chimney Height / Rise and Run Masonry Chimney LinerMasonry Chimney Liner Contd Installing Chimney ComponentsRule Chimney Termination Requirements629M, Standard for Factory Built Chimneys Cumberland Gap Wood Stove Mobile Home InstallationCumberland Gap Wood Stove Appliance Set-Up Adjusting The Blower Speed ControlDoor Handle Assemblies Needs to move smoothlyOver-Firing Your Appliance Wood Selection and Storage Cumberland Gap Wood Stove Operating InstructionsHardwood vs Softwood Processed Solid Fuel Fire LogsMoisture Burning ProcessSeasoned Wood Storing WoodCombustible/Non-Combustible Materials Air ControlsFinal Stage Start-Up Air SystemBurn Rates Heat Output Settings Building a FireHigh Burn Rate Maximum Heat* 30,000+ BTU/hr Medium-Low Burn Rate* 10,000 to 15,000 BTU/hrOpacity Smoke Optional Blower Operating InstructionsClear Space Frequently Asked QuestionsIncorrect Positions Correct Baffle & Blanket PlacementCreosote Chimney Cleaning General MaintenanceAsh Removal System ARS Operating and Cleaning Injury RiskCleaning Plated Surfaces Glass Cleaning Frequency As desiredWhen cleaning glass Disposal of AshesGlass Replacement Inspect Firebrick & Replacement InstructionsAppliance Inspection Routine Fire Risk Injury RiskBaffle Removal & Installation Monthly Quick Reference Maintenance GuideStart Fire Problems Possible Cause Solution Cumberland Gap Wood Stove Troubleshooting GuideService Parts Stocked Service PartsAt Depot #20 Brick Set Stocked at DepotCumberland Gap Warranty Policy November 5 7006-188G Contact Information

CUMBGAP-MBK, CUMPGAP-PMH specifications

The Quadra-Fire CUMPGAP-PMH and CUMBGAP-MBK are established models in the realm of high-efficiency wood stoves, combining modern technology with traditional heating methods to provide an effective and environmentally friendly heating solution.

One of the standout features of the CUMPGAP-PMH and CUMBGAP-MBK models is their impressive heating efficiency. Both stoves exceed industry standards, ensuring that more heat is produced from less fuel, which not only helps in saving on heating costs but also reduces the environmental impact. Their efficient combustion technology means that these stoves produce minimal emissions, making them a responsible choice for eco-conscious consumers.

The construction of these stoves is designed with durability and robustness in mind. Made from high-quality materials, they assure longevity and reliability, which are crucial elements in heating appliances. The intelligently engineered airflow dynamics facilitate efficient burning, allowing these models to maintain optimal performance under various conditions.

Another significant feature of both models is the incorporation of advanced catalytic combustors. These catalysts improve the combustion process, resulting in cleaner burning and enhancing overall efficiency. The catalytic technology functions by allowing smoke and gases to pass through the catalyst, where they undergo additional burning before being released into the atmosphere. This process not only maximizes heat generation but also significantly lowers the emissions of harmful pollutants.

User convenience is also a top priority with these wood stoves. They feature large ash pans and simple loading mechanisms, making it easy to maintain and use them regularly. Their stylish design allows them to fit seamlessly into any home décor, and with variable heating capacities, they can effectively warm spaces of different sizes.

Safety features are another vital characteristic of the CUMPGAP-PMH and CUMBGAP-MBK models. With built-in heat shields and thermal protection, they provide peace of mind to homeowners while promoting safer operation. Additionally, they comply with various safety and efficiency standards set by regulatory bodies.

In conclusion, the Quadra-Fire CUMPGAP-PMH and CUMBGAP-MBK models stand out for their efficiency, design, advanced combustion technology, and safety features. They offer a modern solution to traditional wood heating, ensuring warmth and comfort while taking care of the environment. These stoves represent the perfect synergy of innovation and effectiveness in home heating solutions.